Surface roughness, stainability, and translucency of additively manufactured zirconia with different build orientations and firing processes after coffee thermocycling
AMH exhibited the smoothest surfaces, whereas AMV showed clinically unacceptable R<sub>a</sub>. The color change observed in AM specimens after CTC was within acceptable limits, while the increase in translucency of SM zirconia was perceptible based on previously reported thresholds.
Authors
- Hanan Al‐Johani (ORCID: https://orcid.org/0009-0006-3368-8712)
- Gabriela Panca Sabatini (ORCID: https://orcid.org/0000-0003-3221-2422)
- Mustafa Borga Dönmez (ORCID: https://orcid.org/0000-0002-3094-7487)
- Burak Yılmaz (ORCID: https://orcid.org/0000-0002-7101-363X)
- Çiğdem Kahveci (ORCID: https://orcid.org/0000-0002-2434-7354)
- Gülce Çakmak (ORCID: https://orcid.org/0000-0003-1751-9207)
Institutions
- University of Bern (CH)
- King Abdulaziz University (SA)
- Biruni University (TR)
- Ordu University (TR)
Publication Details
- Journal
- Journal of Prosthetic Dentistry
- Published
- 2025-05-30
- DOI
- https://doi.org/10.1016/j.prosdent.2025.05.023
- Citations
- 2
- Primary Topic
- Additive Manufacturing and 3D Printing Technologies
- Type
- article
- Field-Weighted Citation Impact
- 1.37