Experimental study and efficiency evaluation of cold plasma treatment for distilled water

In this study, we conducted an electrical analysis of the effects of cold plasma on the properties of distilled water, using a corona discharge in a tip–plane configuration. The discharge was initiated by applying a voltage of 7.17 kV with a 2 mm gap between the tip and the water surface. We investigated the impact of plasma treatment on the total dissolved solids (TDS) and conductivity of 20 mL of distilled water, with exposure times ranging from 2 to 12 min. The results show that plasma treatment leads to a significant increase in conductivity and TDS, with a proportional increase relative to the exposure time. In addition to these measurements, we performed a detailed electrical analysis to evaluate the energy efficiency of the plasma treatment. This analysis involved calculating the useful power and energy efficiency using an equivalent electrical model of the corona discharge reactor, as direct measurement of these parameters is challenging in this context. The model allowed us to calculate energy consumption and analyse the electrical behaviour of the system throughout the treatment process. This study also enables us to monitor, control and optimize the energy during plasma treatment, providing insights into the energy dynamics involved. The findings have potential applications in improving energy efficiency in industrial and environmental processes.