Design and Test of a Magnetorheological Damper of a Multi-Layered Permanent Magnet

To effectively suppress spindle vibrations in rotating machinery, magnetorheological (MR) dampers, as an ideal vibration control device, have attracted attention. To enhance the vibration damping effect, in the paper, a MR damper vibration with a multi-layered permanent magnet as the magnetic source is designed, and the self-made magnetorheological fluid is used as the damping medium. The mechanical properties of the MR damper were obtained through testing and calculation. On this base, both simulation and experimental methods are used to demonstrate the effectiveness of the multi-layered permanent-magnet MR damper. The simulation results show that the critical speed increases greatly for the first four modes. The experimental results show that the Y-direction displacement decreases greatly, especially at 1800 rpm and at 3400 rpm, after applying the MR damper. The vibration displacement at 1× frequency shows a 69.74% reduction at 2600 rpm and a 65.69% reduction at 3200 rpm in the Y-direction after applying the MR damper. The effectiveness of the multi-layered permanent magnet MR damper in rotor vibration suppression was confirmed.