Molding Process Effects on the Internal Structures of High-Performance Discontinuous Carbon Fiber Reinforced Thermoplastics

High-performance discontinuous carbon-fiber-reinforced thermoplastics (CFRTPs) offer promising manufacturing flexibility and recyclability for advanced composite applications. However, their mechanical performance and reliability strongly depend on the internal fiber architecture, which is largely determined by the molding process. In this study, three distinct compression molding approaches—CFRTP sheet molding compounds (SMCs), bulk molding compounds (BMCs), and free-edge molding compounds (FMCs)—were systematically evaluated to investigate how processing parameters affect fiber orientation, tape deformation, and impregnation quality. X-ray micro-computed tomography (XCT) was employed to visualize and quantify the internal structures of each material, focusing on the visualization and quantification of in-plane and out-of-plane fiber alignment and other internal structure features. The results indicate that CFRTP-SMC retains largely intact tape layers and achieves better impregnation, leading to more uniform and predictable internal geometry. Although CFRTP-BMC exhibits greater tape deformation and splitting due to increased flow, its simpler molding process and better tolerance for tape shape distortion suggest potential advantages for recycled applications. In contrast, CFRTP-FMC shows significant tape fragmentation and poor impregnation, particularly near free edges. These findings underscore the critical role of a controlled molding process in achieving a consistent internal structure for these materials for the first time. This study highlights the utility of advanced XCT methods for optimizing process design and advancing the use of high-performance discontinuous CFRTP in industry.