High-Performance EMI Shielding Film Based on Low-Dk Polyimide and Trimodal Ag Ink for High-Speed Signal Integrity Enhancement

Electromagnetic interference (EMI) shielding is critical for maintaining signal integrity in high-speed electronic packaging. However, conventional shielding approaches face limitations in process complexity and spatial efficiency. In this study, an EMI shielding film based on trimodal silver (Ag) ink and low-dielectric polyimide (PI) resin was developed and comprehensively evaluated. The fabricated film exhibited an average shielding effectiveness (SE) of −99.7 dB in the 6–18 GHz frequency range and demonstrated a 50% increase in electrical conductivity after lamination (from 0.752 × 105 S/m to 1.13 × 105 S/m). The horizontal thermal conductivity reached 34.614 W/m·K, which was 3.4 times higher than the vertical value (10.249 W/m·K). Signal integrity simulations showed significant reductions in near-end crosstalk (NEXT, 77.8%) and far-end crosstalk (FEXT, 65%). Moreover, cyclic bending tests confirmed excellent mechanical durability, with a normalized resistance change below 0.6 after 1000 cycles at a bending radius of 4 mm. Notably, the film enabled a 50% reduction in signal line spacing while maintaining signal integrity, even without strict compliance with the 3W Rule. These results demonstrate the potential of the proposed EMI shielding film as a high-performance solution for advanced packaging applications requiring high-frequency operation, thermal management, and mechanical flexibility.