Experimental and Numerical Study of Multi-Cluster Fracturing in Horizontal Wells for Low-Permeability Reservoirs

Hydraulic fracturing is a crucial technology for developing unconventional oil and gas resources, widely used to enhance low-permeability reservoirs. To clarify the complex fracture propagation behavior in the Shahejie Formation III of the Dagang Oilfield, Bohai Bay Basin, a typical low-permeability reservoir, we conducted laboratory experiments using physical models along with numerical simulations based on the cohesive element method. These approaches were used to study the impact of various formation and operational parameters on the fracture morphology of multi-cluster hydraulic fracturing, including formation properties (permeability, elastic modulus, Poisson’s ratio) and operational conditions (in situ stress, perforation cluster number, injection rate, and fracturing fluid viscosity). The results indicate that an increased horizontal stress difference coefficient can induce a transition from symmetric bi-wing fractures to asymmetric multi-branch fractures. Increasing the number of perforation clusters leads to stress interference between fractures, enhancing fracture complexity. Higher fracturing fluid injection rates promote the formation of long and wide main fractures but reduce the complexity of the fracture network, while fracturing fluid viscosity has a weaker influence on fracture morphology. Among the investigated factors, the number of perforation clusters and the injection rate exhibited a strong control on the fracture parameters. Notably, the variation trends of the fracture parameters with respect to the influencing factors in both experiments and numerical simulations were generally consistent. This study provides theoretical support for complex fracture network prediction and fracturing design optimization for low-permeability reservoirs.