Removal of reactive dyes-based wastewater with moringa-coated cellulose microcrystals (CMC) produced from sugarcane bagasse

Reactive dyes are mostly used for cotton dyeing, but due to the high amount of unfixed dyes present after the dyeing, various adsorbents have been developed to remove them effectively. This study aims to develop novel bioadsorbents based on cellulose microcrystals (CMC) derived from agri-food waste sugarcane bagasse (SB), with a yield of ∼15 %, which is then coated with cationic protein derived from Moringa oleifera (MO) to enhance absorbent performance. The performance of these absorbents – SBCMC and SBCMC/MO were tested for the removal of C.I. Reactive Red 180 dye from dyeing wastewater. Surface characterisation of bioadsorbents was carried out using FTIR spectroscopy, laser particle size analyser, Zetasizer, and FESEM imaging. Removal percentages of dyes by the adsorbents were carried out using a UV-Vis spectrophotometer in combination with different adsorbent dosages, time, pH and dye concentrations. The size of the CMC was found to be less than ∼10 μm for 50 % of particles and less than ∼20 μm for 90 % of particles. The removal efficiency was found to be higher for moringa-coated SBCMC, with an adsorption capacity of 99.61 mg/g at an initial dye concentration of 1000 ppm and a dosage of 5 g/l. This is attributed to neutralisation of anionic surface as evident through zeta potential, which is reduced from −15.39 to −2.105 mV and also in FESEM images. The experimental data were better fitted to the Freundlich isotherm model and the pseudo-second-order kinetic model. Comparison with other bioadsorbents showed that the developed SBCMC/MO bioadsorbent has a similar or better adsorption capacity, demonstrating the effectiveness of dye removal. This study encourages the use of waste and natural materials as renewable resources to remove dyes from wastewater. • Dye wastewater has negative impact on the aquatic environment and human health. • Textile wet processing is a significant source of coloured wastewater. • An effective and eco-friendly bioadsorbent has been developed. • The adsorption efficiency of dye in wastewater of the developed adsorbent was evaluated. • The adsorption efficiency of the developed adsorbent was compared with other bio-adsorbents.

Authors

Publication Details

Journal
Cleaner Water
Published
2025-05-28
DOI
https://doi.org/10.1016/j.clwat.2025.100087
Citations
2
Primary Topic
Advanced Cellulose Research Studies
Type
article
Field-Weighted Citation Impact
1.19
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Removal of reactive dyes-based wastewater with moringa-coated cellulose microcrystals (CMC) produced from sugarcane bagasse

Md. Hasibur Rahaman, M. A. Jalil Miah, Mohammad Abbas Uddin, Md. Masukul Islam Siam et al.
2 citations
Cleaner Water
Advanced Cellulose Research Studies
1.19
article

Removal of reactive dyes-based wastewater with moringa-coated cellulose microcrystals (CMC) produced from sugarcane bagasse

Md. Hasibur Rahaman, M. A. Jalil Miah, Mohammad Abbas Uddin, Md. Masukul Islam Siam, Md. Khairul Barat
article en
2 citations

Abstract

Reactive dyes are mostly used for cotton dyeing, but due to the high amount of unfixed dyes present after the dyeing, various adsorbents have been developed to remove them effectively. This study aims to develop novel bioadsorbents based on cellulose microcrystals (CMC) derived from agri-food waste sugarcane bagasse (SB), with a yield of ∼15 %, which is then coated with cationic protein derived from Moringa oleifera (MO) to enhance absorbent performance. The performance of these absorbents – SBCMC and SBCMC/MO were tested for the removal of C.I. Reactive Red 180 dye from dyeing wastewater. Surface characterisation of bioadsorbents was carried out using FTIR spectroscopy, laser particle size analyser, Zetasizer, and FESEM imaging. Removal percentages of dyes by the adsorbents were carried out using a UV-Vis spectrophotometer in combination with different adsorbent dosages, time, pH and dye concentrations. The size of the CMC was found to be less than ∼10 μm for 50 % of particles and less than ∼20 μm for 90 % of particles. The removal efficiency was found to be higher for moringa-coated SBCMC, with an adsorption capacity of 99.61 mg/g at an initial dye concentration of 1000 ppm and a dosage of 5 g/l. This is attributed to neutralisation of anionic surface as evident through zeta potential, which is reduced from −15.39 to −2.105 mV and also in FESEM images. The experimental data were better fitted to the Freundlich isotherm model and the pseudo-second-order kinetic model. Comparison with other bioadsorbents showed that the developed SBCMC/MO bioadsorbent has a similar or better adsorption capacity, demonstrating the effectiveness of dye removal. This study encourages the use of waste and natural materials as renewable resources to remove dyes from wastewater. • Dye wastewater has negative impact on the aquatic environment and human health. • Textile wet processing is a significant source of coloured wastewater. • An effective and eco-friendly bioadsorbent has been developed. • The adsorption efficiency of dye in wastewater of the developed adsorbent was evaluated. • The adsorption efficiency of the developed adsorbent was compared with other bio-adsorbents.

Cleaner WaterVol. 3
Clean water and sanitation
Openalex Percentile: Top 22%
Advanced Cellulose Research Studies
1.19
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.