Surface Acoustic Wave Resonator With Epitaxial <i>ε</i>-Ga₂O₃ Thin Films: Performance Characteristics and Temperature Sensor Potential

This letter presents a surface acoustic wave (SAW) resonator based on <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\varepsilon $</tex-math> </inline-formula>-Ga<sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub>O<sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> thin films deposited via metal-organic chemical vapor deposition (MOCVD). Ti/Au interdigital transducers (IDTs), with an approximate finger width of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$1.8~\mu $</tex-math> </inline-formula>m, were fabricated on the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\varepsilon $</tex-math> </inline-formula>-Ga<sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub>O<sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> thin film to create this SAW resonator. The SAW resonator’s series resonant frequency (<inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$f_{s}$</tex-math> </inline-formula>) and parallel resonant frequency (<inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$f_{p}$</tex-math> </inline-formula>) were found to be 673.5 and 673.8 MHz, respectively. Additionally, the device’s modified Butterworth-Van Dyke (MBVD) model was successfully constructed, and the elastic coefficients, piezoelectric coefficients, and dielectric constants of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\varepsilon $</tex-math> </inline-formula>-Ga<sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub>O<sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> material were obtained through first-principles calculations, forming the basis for a finite element simulation model. Finite element simulations revealed that at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$f_{s}$</tex-math> </inline-formula>, the device exhibits Rayleigh mode. Finally, the device demonstrated a high quality factor (<inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$Q =3927$</tex-math> </inline-formula>) and a high temperature coefficient of frequency [(TCF) = -56.73 ppm/K]. These findings reveal the potential application of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\varepsilon $</tex-math> </inline-formula>-Ga<sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sub>O<sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> acoustic devices in temperature sensing.