Explanatory Model of the Material Removal Mechanisms and Grinding Wheel Wear During Grinding of PCD with Water-Based Cooling Lubricants

Polycrystalline diamond (PCD), which is widely used to manufacture cutting tools due to its extreme hardness, in most cases requires grinding for machining. The cooling lubricant selected for PCD grinding largely affects the frictional conditions and the thermo-mechanical load collective between the diamond grinding wheel and the PCD. As a consequence of this, the material removal and grinding wheel wear mechanisms during grinding PCD depend on the cooling lubricant used. In this study, experimental and numerical investigations were taken into account, demonstrating that using a water-based cooling lubricant during PCD grinding predominantly leads to a mechanical load on workpiece and grinding wheel rather than thermal loads. These original findings can be used to complement existing explanatory models of the PCD grinding process valid for grinding with oil as a cooling lubricant. The aim of this work is to contribute a novel extension to the existing material removal and grinding wheel wear models to enable them for the grinding process with a water-based cooling lubricant. The knowledge obtained from this work is intended to serve as a basis for future industrial process design.