Hydrodynamic Performance and Vortex Structure Analysis of a Toroidal Propeller

Because of their distinctive toroidal blade configuration, toroidal propellers can improve propulsion efficiency, reduce underwater noise, and enhance blade stability and strength. In recent years, they have emerged as an extremely promising novel underwater propulsion technology. To investigate their working mechanism, a geometric model of the toroidal propeller was initially established, and an unsteady numerical calculation model was constructed based on the sliding mesh technique. Subsequently, with the E779A conventional propeller as the research subject, the numerical model was verified, and a grid independence test was accomplished. Thereafter, the hydrodynamic performance of the toroidal propeller under diverse advance coefficients was analyzed based on the numerical model, and open water characteristic curves were established. Eventually, the surface pressure distribution, velocity field, and vorticity field of the toroidal propeller under various working conditions were studied. The outcomes demonstrate that the toroidal propeller attains the maximum propulsion efficiency at high advance coefficients, possesses a broad range of working condition adaptability, and is more applicable to high-speed vessels. At low advance coefficients, the toroidal propeller exhibits a relatively strong thrust performance, with the thrust generated by the front propeller being greater than that generated by the rear propeller, and the pressure peak emerges at the leading edge of the transition section of the front blade. The analysis of the velocity field indicates that its acceleration effect is superior to that of the conventional propeller. The analysis of the vorticity field reveals that the trailing vortices shed from the leading edge of the transition section of the front propeller merge and develop with the tip vortices, resulting in a more complex vortex structure. This research clarifies the working mechanism of the toroidal propeller through numerical simulation methods, providing an important basis for its performance optimization.