Synchronised Control of Multiple Actuators of Wind Turbines

Wind turbines align with the wind direction and adjust to wind speed by rotating their nacelle and blades using electromechanical or hydraulic actuators. Due to the fact that the rated capacity of wind turbines is increasing and that the actuators are reaching some size limits, the current solution is to install several actuators at each joint until the required torque is reached. The problem with this approach is that, despite the fact the actuators can be selected from the same type and series, they typically have distinct parameters, resulting in different behaviours. The synchronisation of actuators of wind turbines has still not been studied in the specialised literature. Therefore, a control approach for the synchronisation of the pitch actuators is proposed in this work. Two cases are considered: the synchronisation of torque outputs and the synchronisation of position angle. The simulation results indicate that the proposed solution is effective for synchronising actuators, either when they are placed together on the same blade or when they are on separate blades while simultaneously following the collective pitch control command.