Research and Implementation of OFC-Based Multicarrier Sliceable Bandwidth Variable Transponders in Hybrid Laser/Microwave Satellite Networks

In this paper, a multicarrier sliceable bandwidth variable transponder based on optical frequency comb (OFC) is proposed. The structure of the transponder's internal switching unit is designed, and the principle of generating ultra-flat OFC based on a standalone dual-parallel Mach-Zehnder modulator (DPMZM) is analyzed. A scheme for dynamic allocation of multi-channel frequency slots and flexible resource configuration in hybrid laser/satellite networks is provided, and an experimental system is built to test the data transmission and bandwidth allocation capabilities of laser and microwave links. Experimental results indicate that the muticarrier generation unit can produce a 7-line flat OFC with a flatness of 1.6 dB, and the switching unit can achieve channel switching and frequency slot allocation, with a minimum slice width of 12.5 GHz. After passing through this node, the phase noise of the 2 GHz IF signal with frequency offsets at 10 kHz and 100 kHz are -59.28 and -87.95 dBc/Hz, respectively, and the bit error rates (BERs) of the recovered baseband data from the laser and microwave links are less than 10<sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-9</sup>. These results validate the feasibility of the designed transponder to be applied in the key relay nodes of satellite networks. The proposed scheme can solve the problems of low spectrum utilization and the inability to dynamically allocate resources in traditional WDM satellite networks.