Surface Characterization of Cylinder Liner–Piston Ring Friction Pairs Under Different Temperature and Load by Power Spectral Density Method

Piston ring–cylinder liner is one of the most important friction pairs in internal combustion engines. The surfaces of the piston ring and the cylinder liner are affected by high temperature and high pressure, and the influence mechanism of temperature and pressure on their microscopic morphology parameters is yet to be revealed. In this paper, high temperature friction and wear experiments on the piston ring and cylinder liner are carried out to obtain the microscopic morphology of the cylinder liner and piston ring at different temperatures and pressures, and their changes under different temperatures and pressures are investigated by using two methods, namely, fractal dimension and three-dimensional surface roughness characterization. The results show that, as the temperature increases, the texture patterns on the cylinder liner’s friction surface become simpler, with the fractal dimension showing a decreasing trend while the roughness shows an increasing trend. Compared to the condition at 80 °C, the surface roughness (Sa) of the cylinder liner increased by approximately 58.43% at 190 °C, while that of the piston ring increased by about 96.5%. With increasing pressure, both the fractal dimension and the roughness of the friction surface first decrease and then increase.