Stable incorporation of amino-functionalized silver phosphate nanoparticles in the polyamide active layer of desalination membranes for enhanced antifouling properties

Various nanoparticles (NPs) have been incorporated into the membrane's active layer. Still, the success of such a decoration depends on the nano-size and homogeneity of the dispersion to be used during interfacial polymerization (IP). The current study aimed to achieve a stable and uniform incorporation of the silver phosphate (AgP) NPs in the membrane’s active layer to develop efficient desalination and antifouling properties. Hence, this work was focused on obtaining nano-sized silver phosphate and then purposely decorating the amine (-NH 2 ) functional groups on the AgP NPs, resulting in F-AgP. These features resulted in a uniform and homogeneous dispersion of the F-AgP NPs in the aqueous phase used for IP. The aqueous phase contained diethylenetriamine (DETA, 3A) as an amine, containing 0.05% wt/v of the F-AgP NPs. The obtained aqueous solution gave a uniform incorporation of the F-AgP NPs in the polyamide active layer upon IP reaction with acid chloride in the organic phase. Two organic phases were used: terephthaloyl chloride (TPC) and trimesoyl chloride (TMC) to obtain F-AgP-3A/TPC and F-AgP-3A/TMC membranes. The obtained membranes showed promising desalination performance, where F-AgP-3A/TPC membranes showed Na 2 SO 4 and CaCl 2 rejections of >96%, whereas F-AgP-3A/TMC membranes had 83 and 75% rejections, respectively. The impact of feed temperature revealed a slight decline in Na 2 SO 4 rejection to 95.0% and an increase in permeate flux to 29.6 L m -2 h -1 at 35 in the case of F-AgP-3A/TPC. In addition, the stability tests also revealed a stable performance of the membranes in terms of permeate flux and salt rejection over 840 minutes. The BSA fouling studies showed that after an initial minor decrease in the normalized flux of the membranes, the rejection of Na 2 SO 4 remained stable at >96%. Regarding anti-biofouling potentials, both membranes performed equally well, owing to AgP NPs in the active layer inhibiting >99% growth of the gram-positive and negative bacterial colonies.

Authors

Institutions

Publication Details

Journal
Journal of Science Advanced Materials and Devices
Published
2025-05-25
DOI
https://doi.org/10.1016/j.jsamd.2025.100916
Citations
2
Primary Topic
Membrane Separation Technologies
Type
article
Field-Weighted Citation Impact
1.63
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Stable incorporation of amino-functionalized silver phosphate nanoparticles in the polyamide active layer of desalination membranes for enhanced antifouling properties

Umair Baig, Fahad Ayesh Alharthi, Isam H. Aljundi, Abdulrahman Abutaleb et al.
2 citations
Journal of Science Advanced Materials and Devices
Membrane Separation Technologies
1.63
article

Stable incorporation of amino-functionalized silver phosphate nanoparticles in the polyamide active layer of desalination membranes for enhanced antifouling properties

Umair Baig, Fahad Ayesh Alharthi, Isam H. Aljundi, Abdulrahman Abutaleb, Abdul Waheed, Mohammad Azam Ansari
article en
2 citations

Abstract

Various nanoparticles (NPs) have been incorporated into the membrane's active layer. Still, the success of such a decoration depends on the nano-size and homogeneity of the dispersion to be used during interfacial polymerization (IP). The current study aimed to achieve a stable and uniform incorporation of the silver phosphate (AgP) NPs in the membrane’s active layer to develop efficient desalination and antifouling properties. Hence, this work was focused on obtaining nano-sized silver phosphate and then purposely decorating the amine (-NH 2 ) functional groups on the AgP NPs, resulting in F-AgP. These features resulted in a uniform and homogeneous dispersion of the F-AgP NPs in the aqueous phase used for IP. The aqueous phase contained diethylenetriamine (DETA, 3A) as an amine, containing 0.05% wt/v of the F-AgP NPs. The obtained aqueous solution gave a uniform incorporation of the F-AgP NPs in the polyamide active layer upon IP reaction with acid chloride in the organic phase. Two organic phases were used: terephthaloyl chloride (TPC) and trimesoyl chloride (TMC) to obtain F-AgP-3A/TPC and F-AgP-3A/TMC membranes. The obtained membranes showed promising desalination performance, where F-AgP-3A/TPC membranes showed Na 2 SO 4 and CaCl 2 rejections of >96%, whereas F-AgP-3A/TMC membranes had 83 and 75% rejections, respectively. The impact of feed temperature revealed a slight decline in Na 2 SO 4 rejection to 95.0% and an increase in permeate flux to 29.6 L m -2 h -1 at 35 in the case of F-AgP-3A/TPC. In addition, the stability tests also revealed a stable performance of the membranes in terms of permeate flux and salt rejection over 840 minutes. The BSA fouling studies showed that after an initial minor decrease in the normalized flux of the membranes, the rejection of Na 2 SO 4 remained stable at >96%. Regarding anti-biofouling potentials, both membranes performed equally well, owing to AgP NPs in the active layer inhibiting >99% growth of the gram-positive and negative bacterial colonies.

Journal of Science Advanced Materials and DevicesVol. 10(3)
King Fahd University of Petroleum and Minerals (SA), Saudi Water Authority (SA), Imam Abdulrahman Bin Faisal University (SA)
Clean water and sanitation
Openalex Percentile: Top 17%
Membrane Separation Technologies
1.63
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.