Determining Key Parameters in Rock Properties for the Design of Hydroelectric Projects: A Case Study in Morona Santiago, Ecuador

Subsurface characterisation is a fundamental aspect of the planning and design of hydroelectric projects, as it enables the assessment of the technical and geotechnical feasibility of the proposed infrastructure, ensuring its stability and functionality. This study focuses on the characterisation of rock masses from boreholes in the “Santa Rosa” and “El Rosario” areas, located in Morona Santiago, Ecuador, to determine key parameters for the design of hydroelectric projects. Field and laboratory tests were conducted, including uniaxial compression tests, indirect tensile–Brazilian tests, point load tests, tilt tests, and geomechanical classifications using the RMR and Q systems. The results show that igneous rocks, such as basalt and andesite, exhibit mechanical properties ranging from moderate to high, with uniaxial compressive strengths exceeding 120 MPa in the case of basalt, classifying it as a strong rock. In contrast, metamorphic rocks, such as chert, exhibit lower strength, with values ranging between 69.69 MPa and 90.63 MPa, classifying them as moderately strong. The RMR and Q index values indicate a variable rock mass quality, ranging from excellent in diorite and granite sectors to low in areas with significant discontinuities and alterations. Additionally, variations in basic friction angles were identified, ranging from 18° to 38°, which directly influence the stability of the proposed structures. In conclusion, this study highlights the importance of geomechanical characterisation in ensuring the technical feasibility of hydroelectric projects, providing key information for the design and development of safe and sustainable infrastructure in the region.