A short-arc hardware delay estimation method for inter-satellite links to improve BDS-3 precise orbit determination

The inter-satellite link (ISL) equipment of the third-generation BeiDou Navigation Satellite System (BDS-3) can enhance the accuracy of precise orbit determination (POD) for BDS-3 satellites. However, the hardware delays within ISL observations can impact the measurement accuracy of ISL observations. This study evaluates the characteristics of hardware delays in ISL observations for BDS-3 medium Earth orbit (MEO) satellites and investigates their effects on POD. Analysis shows that most links exhibit slow variations in hardware delays, with standard deviations (STD) of 6.4 cm and 3.6 cm over 45 days for the C19-C25 and C20-C21 links, respectively. Conversely, some links like C30-C23 and C30-C33 show more pronounced variations, with STD values reaching 17.7 cm and 14.1 cm within three days. Links involving satellites C23 and C30 display higher variability and significant jumps in hardware delays compared with other links. The larger variations in hardware delays of these links can be absorbed by other parameters, thereby affecting the accuracy of parameter estimation. To mitigate their impact on POD, a segmented estimation strategy for hardware delays is proposed. This strategy divides a single link into multiple segments based on a set interval length and estimates the hardware delay parameters for each segment separately, thereby absorbing the variations in hardware delays or unmodeled errors. The effectiveness of this strategy is demonstrated through ISL POD residual analysis, comparison with L-band orbit determination results, and validation using Satellite Laser Ranging (SLR) residuals. The root mean square (RMS) of ISL observation residuals decreased by approximately 44.3%, from 6.1 cm to 3.4 cm. Comparisons with L-band orbits confirmed an approximate 28.2% reduction in the 3D RMS of orbit discrepancies, from 26.5 cm to 19.0 cm. Additionally, the RMS of the overall SLR residuals showed a slight decrease. Overall, the improved segmented estimation strategy effectively reduces the influence of hardware delay variations on BDS-3 orbit determination, notably enhancing the orbit determination accuracy of BDS-3 satellites, especially for C23 and C30, which experience larger hardware delay fluctuations.