Assessment of End-of-Life Design in Consumer Coffee Makers

In the United States, many small appliances and products are single use or unrepairable when a component fails. This leads to an increased frequency of new product purchasing and a high rate of waste production. To solve this, product design should shift to allow for the easy repair, replacement, or reuse of failed components by the consumer. A research study was conducted to evaluate the sustainability and reuse potential of two popular coffee makers. The coffee maker pair was disassembled and evaluated on nine parameters to quantify the product design for disassembly. The analysis indicated that the full disassembly of the pod coffee maker components would take approximately 97 min and require 8 tools. During the disassembly phase, the essential components of the coffee maker were discovered to be significantly interconnected, making repair at home very difficult. The disassembly of a drip coffee maker was 21 min with lower levels of complexity in most parts. The difficulty of repairing these products supports the theory that sustainable design within modern products is rarely a priority. Businesses value low manufacturing costs to have a competitive market advantage at the expense of sustainable design. As sustainability and waste reduction become a higher priority in society, consumers should demand product designs with easy to repair, replace, or reuse components.