Advances in the Development of Hydrometallurgical Processes in Acidic and Alkaline Environments for the Extraction of Copper from Tailings Deposit

The geopolitical and economic situation impacts raw materials demand. As principal ore deposits reach exhaustion, the study of new sources of raw materials becomes essential. Therefore, mining wastes emerge as alternative sources of raw materials. Their physicochemical properties, such as small particle size or concentration of some metals of interest, enhance reprocessing. A number of critical raw materials (As, Co, Cu, Sb) and base metals (Pb, Zn), as well as precious metals (Ag), were found present in an abandoned tailing deposit composed by finely grounded washed roasted pyrites within the Iberian Pyrite Belt. Copper leaching from a sample of this deposit was investigated. Two hydrometallurgical approaches were studied: acidic leaching with and without activated carbon; and alkaline leaching with glycine solutions. Leaching tests were carried out during 24 h at ambient and moderate temperatures (60 °C). In acidic medium, the maximum copper extraction varied from 88 to 92.5%, while in alkaline medium, the maximum copper extraction was in the range of 71%–76%. Using activated carbon and H2O2 seemed to slightly promote the copper extraction with the maximum extraction (92.5%) after 2 h of leaching at 60 °C. Complementarily, above 50% of the zinc and cobalt contained were extracted. In contrast, temperature in alkaline conditions played a key role in reaction speed, but also in precipitation of copper insoluble compounds. In addition, the glycine solution at pH 10–10.5 showed high selectivity for copper over zinc, iron, lead, arsenic, and antimony. Two extra tests at pH above 12 showed arsenic dissolution (up to 51% at pH 12.5).