Study on Seismic Performance of Reinforced Concrete Columns Reinforced with Steel Strip Composite Ultra–High–Performance Concrete

To enhance the seismic performance of existing reinforced concrete (RC) columns, this study proposes a novel strengthening method that combines steel strips with ultra–high–performance concrete (UHPC). The seismic behavior of the proposed method is investigated through quasi–static cyclic tests conducted on four strengthened columns and one control column. The experimental parameters include the type of reinforcement (UHPC–only and UHPC combined with steel strips) and the thickness of the UHPC strengthening layer. The failure modes, hysteretic behavior, energy dissipation capacity, and stiffness degradation of the specimens are systematically analyzed. The results show that, compared to the unstrengthened column, the UHPC–strengthened columns achieved maximum increases of 73.73% in peak load and 23.68% in ductility coefficient, while the columns strengthened with composite steel strips achieved further improvements of up to 84.79% and 50.23%, respectively. The composite strengthening method significantly improved the failure mode, with crack distribution changing from localized crushing to multiple fine cracks. The displacement ductility coefficient reached as high as 6.28, and the hysteretic curve fullness and cumulative energy dissipation increased by a factor of two to three. Finally, based on moment equilibrium theory, a theoretical formula is proposed to calculate the lateral ultimate flexural capacity of RC columns strengthened with steel strip–UHPC composites, which shows good agreement with the experimental results.