Peculiarities of the Creep Behavior of 15Kh2NMFAA Vessel Steel at High Temperatures

The creep properties of 15Kh2NMFAA nuclear WWER (water–water energetic reactor) vessel steel in the range of 500–1200 °C temperatures, which may appear during severe nuclear reactor accidents, were investigated. The present paper attempts to analyze the creep curves obtained from tensile testing at high temperatures using the Larson–Miller parametric technique. The power law rate and material coefficient of Norton’s equation with the Monkman–Grant relationship coefficient were found for each test temperature. It is shown that in accordance with the Monkman–Grant relationship coefficient values, changing the creep type from dislocation glide to high temperature dislocation climb occurs in the temperature range of 600–700 °C, which leads to a slope change in the Larson–Miller parameter plot and the conversion of steel creep behavior. It is also shown that in the range of A1–A3 temperatures, a stepwise change in creep characteristics occurs, which is associated with phase transformations. In addition, the constancy of the product of the time to rupture τr and the minimum creep rate ϵ˙min in the ranges of 600–700 °C and A3—1200 °C was noted. The proposed approach improves the accuracy of time to rupture estimation of 15Kh2NMFAA steel by at least one order of magnitude. Based on the research results, the calculated dependence of the steel’s long-term strength limit on temperature was obtained for several time bases, allowing us to increase the accuracy of material survivability prediction in the case of a severe accident at a nuclear reactor.