Graphene Oxide-Doped CNT Membrane for Dye Adsorption

Recently, graphene oxide (GO) has been largely investigated as a potential adsorbent towards dyes. However, the major obstacle to its full employment is linked to its natural powder consistence, which greatly complexifies the operations of recovery and reuse. With the aim to overcome this issue, the present work reports on the design of GO-modified carbon nanotubes buckypapers (BPs), in which the main component, GO, is entirely entrapped in the BP grid generated by CNTs for the double purpose of (a) increasing adsorption performance of GO-BPs and (b) ensure a fast process of regeneration and reuse. Adsorption experiments were performed towards several dyes: Acid Blue 29 (AB29), Crystal Violet (CV), Eosyn Y (EY), Malachite Green (MG), and Rhodamine B (RB) (C_i = 50 ppm, pH = 6). Results demonstrated that adsorption is strictly dependent on the charge occurring both on GO-BP and dye surfaces, observing great adsorption capacities towards MG (493.44 mg g^-1), RB (467.35 mg g^-1), and CV (374.53 mg g^-1), due to the best coupling of dye cationic form with negative GO-BP surface. Adsorption isotherms revealed that dyes capture onto GO-BPs is thermodynamically favored (ΔG < 0), becoming more negative at 313 K. Kinetic studies evidenced that the process can be described through a pseudo-first-order model, with MG, RB, and CV exhibiting the highest values of k₁. In view of these results, the following trend in GO-BP adsorption performance has been derived: MG ≈ RB > CV > AB29 > EY.