Momentum microscopy with combined hemispherical and time-of-flight electron analyzers at the soft X-ray beamline I09 of the diamond light source

The three-dimensional recording scheme of time-of-flight momentum microscopes (ToF-MMs) is advantageous for fast mapping of the photoelectron distribution in (E,k) parameter space over the entire Brillouin zone. However, the 2 ns pulse period of most synchrotrons is too short for pure ToF photoelectron spectroscopy. The use of a hemispherical analyzer (HSA) as a pre-filter allows ToF-MM at such high pulse rates. The first HSA & ToF hybrid MM is operated at the soft X-ray branch of beamline I09 at the Diamond Light Source, UK. The photon energy ranges from 105 eV to 2 keV, with circular polarization available for hν ≥ 145 eV. The HSA reduces the transmitted energy band to typically 0.5 eV, which is then further analyzed by ToF recording. In initial experiments, the overall efficiency gain when switching from the standard 2D (k_x,k_y) mode to the 3D (k_x,k_y,E_kin) hybrid mode was about 24. This value is determined by the number of resolved kinetic energies (here 12) and the transmission gain of the electron optics due to the high pass energy of the HSA in hybrid mode (E_pass up to 500 eV). The transmission gain depends on the size of the photon footprint on the sample. Under k-imaging conditions, the energy and momentum resolution are 10.2 meV (FWHM) (4.2 meV with 200 μm slits and E_pass = 8 eV) and 0.010 Å^-1. The energy filtered X-PEEM mode showed a spatial resolution of 250 nm. As examples, we show 2D band mapping of bilayer graphene, 3D mapping of the Fermi surface of Cu, circular dichroic ARPES for intercalated indenene layers, and the sp valence band of Au. Full-field photoelectron diffraction patterns of Ge show rich structure in k-field diameters of up to 6 Å^-1.