Experimental Investigation of Lubrication Performance of Rhombic-Textured TiN-Coated Surfaces Under Lubricated Conditions

Surface texture and titanium nitride (TiN) coating have been established as effective methods for enhancing the tribological properties of mechanical friction pairs. This work aims to investigate the lubrication performance of rhombic-textured TiN-coated surfaces under oil-lubricated conditions using a pin-on-disk test mode. A total of 17 sets of samples were designed, including a control sample (with no rhombic texture and no TiN coating), a TiN-coated sample and rhombic-textured TiN-coated samples. The rhombic surface texture was fabricated using the end surface of a brass bar. TiN coating deposited TiN on the textured surface. This study focuses on measuring and comparatively analyzing the lubrication load capacity, friction coefficient (COF) and binding force of TiN coatings/substrates in the pin-on-disk friction test mode. Compared with the bare control sample, a rhombic texture can enhance lubrication load-carrying capacity by generating hydrodynamic lubrication effects, thereby reducing friction. Additionally, a rhombic texture enables the mitigation of third-body wear due to wear debris. This research provides valuable insights into the design and fabrication of mechanical friction pairs with high wear resistance under oil-lubricated conditions. For lubrication property enhancement, the influence of groove depth was larger than that of the length of the rhombic side.