Clinical Outcomes in the Treatment of Pertrochanteric Femur Fractures: A Retrospective Cohort Study

<b>Background:</b> Pertrochanteric fractures of the proximal femur present a common challenge for traumatologists, with intramedullary nailing emerging as the preferred treatment. Complication rates are around 20%, including screw jamming, refractures, implant breakage, or medial migration, with cut-out being the most common. A tip-apex distance (TAD) of >25 mm and incorrect cephalic screw position are predictive factors for cut-out. This study assesses outcomes using the Elos intramedullary nail, based on the experience of the Department of Orthopedics and Traumatology at Ospedale Maggiore in Bologna. <b>Methods:</b> We conducted a retrospective cohort study of 344 patients treated with the Elos intramedullary nail for pertrochanteric femoral fractures from 1 January 2017 to 31 December 2022. The Elos^®-Intrauma nail was implanted using the standard technique. Initial X-rays classified fractures according to the AO-OTA classification, and postoperative X-rays confirmed the cephalic screw's placement per Cleveland's regions. Patients were divided into two groups: optimal cephalic screw position (positions 5-8-9) and other positions. We evaluated TAD, calcar-referred TAD (CalTAD), and postoperative reduction quality using Chang's criteria. The incidence of cut-out and other complications were assessed in connection with these measurements. <b>Results:</b> Among the 344 patients, 227 (65.9%) had the screw in positions 5-8-9, while 117 (34.1%) had it in other positions. The median TAD was 19.47 ± 6.26 mm (range 3.96-46.6), with TAD ≤ 25 mm in 265 patients (77%). The median CalTAD was 22.37 ± 5.65 mm (range 8.75-45.3), with CalTAD ≤ 25 mm in 231 patients (67.1%). According to Chang's criteria, 8 cases (2.3%) had poor reduction, 139 cases (40.4%) had acceptable reduction, and 197 cases (57.3%) had excellent reduction. Cut-out occurred in four cases (1.19%). Multivariate analysis revealed only poor reduction and TAD > 25 mm as independent predictors of cut-out (<i>p</i> < 0.05), while cephalic screw position, CalTAD, and fracture type did not impact cut-out incidence. <b>Conclusions:</b> This study indicates that optimal TAD and quality of reduction are crucial for minimizing cut-out risks. The Elos intramedullary nail shows favorable outcomes with a low cut-out incidence when these parameters are met. Emphasis should be placed on achieving a TAD ≤ 25 mm and excellent reduction quality to reduce complications.