Highly Birefringent FBG Based on Femtosecond Laser-Induced Cladding Stress Region for Temperature and Strain Decoupling

We present and demonstrate a highly birefringent fiber Bragg grating (Hi-Bi FBG) that was fabricated using a femtosecond laser to induce a sawtooth stress region near the FBG. The FBG is fabricated with a femtosecond laser point-by-point method, while the sawtooth stress region is generated in fiber cladding using the femtosecond laser along a sawtooth path. This sawtooth stressor can introduce an anisotropic and asymmetric refractive index profile in the cross-section of the fiber, resulting in additional birefringence up to 2.97 × 10−4 along the axial direction of the FBG. The central wavelengths of the Hi-Bi FBG at the fast and slow axes exhibit different sensitivities to temperature and strain, allowing simultaneous measurement of the strain and temperature by tracking the resonant wavelength shifts in the two axes. The experimental results show that the temperature sensitivities of the fast and slow axes are 10.32 pm/°C and 10.42 pm/°C, while the strain sensitivities are 0.91 pm/µε and 0.99 pm/µε. The accuracy of this proposed sensor in measuring strain and temperature is estimated to be 2.2 µε and 0.2 °C. This approach addresses the issue of cross-sensitivity between temperature and strain and offers some advantages of low cost, compact size, and significant potential for advancements in practical multi-parameter sensing applications.