Dealing with the heat: Assessing heat stress in an Arctic seabird using 3D-printed thermal models

The Arctic is warming at four times the global average rate and most studies have focused on the indirect (e.g., changes in food web) rather than the direct effects of climate change. However, as Arctic animals often have low capacity to dissipate heat, the direct effect of warming could impact them significantly (heat stress). To study heat stress, biophysical models have been used in many species to estimate operative temperature (Te, integrated temperature of the thermal environment experienced by an individual). Here, we developed biophysical models of an Arctic seabird, the thick-billed murre (Uria lomvia). We demonstrated that 3D-printed painted models perform similarly to the more traditionally used feather-covered models. We deployed our models on Coats Island, Nunavut, Canada to study heat stress, which occurs in murres when operative temperature is above 21.2 °C (the temperature at which evaporative water loss (EWL) rates increase to maintain a constant body temperatures). Murre operative temperatures ranged from 5.5 °C to 46.5 °C despite ambient temperatures never exceeding 24.7 °C (range: 3.4-24.7 °C), and murres experienced heat stress on 61 % of the days during the breeding season (range: 24-85 %). Using known equations of EWL as a function of temperature, we estimated that murres lost 3.79 % to 4.61 % of their body mass in water daily. Our study confirms the physiological challenges faced by Arctic seabirds during the breeding season, while also demonstrating the value of biophysical models as non-invasive tools to study the effects of heat stress on seabirds.