Numerical Simulation and Analysis of the Influencing Factors of Ice Formation on Electrified Railway Contact Lines

This study focuses on the icing problem of electrified railway contact lines. Using computational fluid dynamic (CFD) numerical simulations, a three-dimensional mesh model of the CuAg0.1AC120 contact line was developed. This study reveals the effects of environmental factors such as droplet diameter, air–liquid water content (LWC), and ambient temperature on the icing morphology. The results show that the asymmetric cross-sectional structure of the contact line causes localized droplet accumulation in the groove areas, leading to distinctly non-uniform and directional ice formation. At high wind speeds, secondary icing is observed on the leeward side, where droplets are carried by bypass airflow—this phenomenon is not prominent in standard conductors. Additionally, the contact line exhibits a more sensitive response to temperature and air moisture content changes, suggesting that it is more suited to a localized anti-icing strategy. The numerical model developed in this study provides a theoretical foundation for predicting ice loads on complex section conductors and supports the design optimization and maintenance of high-speed railway catenary systems.