Study on the Sealing Performance of a Composite Plugging System Comprising Cement and Sn58Bi Alloy for Wellbore Applications

To address the issue of sealing failure of cement materials commonly used as wellbore plugging agents in CO₂ geological storage, this study proposes a composite wellbore plugging method that combines cement and Sn58Bi alloy. In this method, a composite sealing structure of "cement-Sn58Bi alloy-cement" is constructed within the wellbore. To evaluate the performance of this method, a series of pressure-bearing and gas-tightness experimental devices were designed, and experiments were conducted to assess the pressure-bearing capacity and gas sealing performance of the composite plugs. Additionally, optical microscopy was employed to observe and analyze the microstructure of the plugs. The effects of alloy proportion and temperature on the sealing performance of the composite plugs were systematically investigated. The experimental results indicate that both the pressure-bearing capacity and gas-tightness performance of the plugs are influenced by the alloy content and ambient temperature. Specifically, when the temperature increased from 30 °C to 60 °C, the pressure-bearing capacity decreased by an average of 28.3%; when further increased from 60 °C to 90 °C, it decreased by an average of 21.1%. In contrast, the gas-tightness performance exhibited an opposite trend, with the breakthrough pressure increasing by an average of 25.7% and 22.0%, respectively, over the same temperature intervals. Moreover, increasing the alloy proportion in the composite plugs enhanced both their pressure-bearing and gas-tightness performances. This study provides theoretical support for the application of composite plugs in CO₂ geological storage.