Mitigating Gas Emissions from the Dairy Slurry Management Chain: An Enhanced Solid–Liquid Separation Technology with Tannic Acid

Identifying novel flocculants to improve the separation efficiency of dairy slurries is important to facilitate slurry recycling with a low carbon footprint. Two microcosm experiments were conducted to differentiate ammonia (NH3), nitrous oxide (N2O), carbon dioxide (CO2), and methane (CH4) emissions from liquid and solid fractions obtained using conventional (mechanical separator) and enhanced (flocculant + mechanical separator) solid–liquid separation (SLS) methods during the storage and soil application phases. Tannic acid (TA) was investigated as a potential flocculant in order to explore its effectiveness in reducing greenhouse gas (GHG) emissions during the storage and soil phases. Compared to the conventional SLS method, the employment of the enhanced SLS method reduced GHG emissions during the storage and soil application phases by 53.64% and 31.63%, respectively, thereby leading to an integrative mitigation of GHG emissions across the storage and soil application chain; however, it strongly increased NH3 emissions by 70.96% during the soil application phase, demonstrating a higher risk of gaseous N loss. Meanwhile, large trade-offs in N2O, CH4, and NH3 emissions between the solid and liquid fractions during the storage phase were observed, and the reduced CH4 and NH3 emissions during the storage phase were also partly offset by increased emissions during the soil application phase. In conclusion, enhanced separation technology using tannic acid as a flocculant can reduce GHG emissions from the management chain, with synergistic mitigation of CH4 and N2O, but the risk of increased NH3 emissions requires further attention. This study may be helpful in mitigating GHG emissions and recycling plant-derived tannic acid in the circular agriculture context.