Petrophysical properties of the middle Miocene sediments on the central Gulf of Suez, Egypt

Petrophysical properties are essential for exploring subsurface rocks, particularly in evaluating their capacity to store and transmit fluids. These properties play a crucial role across various geoscientific disciplines, including lithologic characterization, rock mechanics, and reservoir performance evaluation. Their variability is influenced by a complex interplay of depositional environments, diagenetic alterations (e.g., cementation, dissolution), burial history, structural deformation, and fluid-rock interactions, spanning diverse geological settings (e.g., Lee et al., 2021aLee et al., , 2021bLee et al., , 2025;;Spahić et al., 2024;Pan et al., 2025;Zou et al., 2025). Understanding these properties is fundamental for assessing reservoir quality, optimizing fluid extraction and injection processes (including hydrocarbons, water, and CO₂), and enhancing reservoir management strategies (e.g., Dandekar, 2013;Falcon-Suarez et al., 2024;Shedid, 2019). A comprehensive study that integrates a diverse and extensive range of petrophysical data and ensures its accessibility has been required for advancing geoscientific research and technological developments.Around the Gulf of Suez, Miocene sedimentary sequences are crucial for understanding the syn-rift structural and stratigraphic evolution of the Neogene continental rifting system while also forming the region's primary hydrocarbon reservoirs (Ayyad et al., 2023;Alsharhan, 2003;Bosworth et al., 1998;Bosworth and McClay, 2001;Evans, 1988;Henaish et al., 2023;McClay et al., 1998;Moustafa and Khalil, 2020;Sallam et al., 2019;Sobhy and Moustafa, 2024). Although extensive explorations and research have been conducted, Miocene deposits remain a subject of interest for both geoscientists and oil industry. Previous studies have used petrophysical datasets to reveal important insights into the structural and stratigraphic frameworks of subsurface Miocene sequences (e.g., Abudeif et al., 2016;Attia et al., 2015), as well as deeply buried Mesozoic strata (e.g., Mohamed et al., 2023), thereby enhancing our understanding of basin evolution and associated petroleum systems. However, due to the confidentiality surrounding productive reservoirs, access to such datasets has not been widely available and published, hindering broader scientific analysis and data re-use. This limitation highlights the need for more data-sharing initiatives and further comprehensive studies. In response, this study presents a comprehensive petrophysical dataset from the middle Miocene reservoir interval in the central Gulf of Suez, contributing to the regional geological knowledge base.This study presents a comprehensive petrophysical dataset for the middle Miocene Sidri Member in the Belayim oil field, central Gulf of Suez. While petrophysical characteristics of the Sidri Member have been examined in previous studies (e.g., Abd El Rahman et al., 2012;Fathy, 2012;Lee et al., 2025;Nabawy and Barakat, 2017;Ramadan and Eysa, 2012), the lack of complete methodological details and publicly accessible dataset has limited comparative and follow-up analyses. Given that its reservoir significance and variability (e.g., Abudeif et al., 2016;Abuhagaza et al., 2021;Alsharhan, 2003;Attia et al., 2015;El-Kadi et al., 2016;El-Khadragy et al., 2016;Abd El Rahman et al., 2012;Rizk, 1992;Radwan, 2021), integrated studies are essential for improving our understanding of synrift evolution and reservoir potential. To address these gaps, this study provides a detailed account of the methodologies and measurements used to analyze core samples from wells 112-82 and BB4. The dataset includes grain and bulk density, porosity, pore-throat radius, horizontal and vertical permeability, and oil and water saturation, incorporating a combination of previously unpublished, re-evaluated, and re-used data. By making these data publicly available to promote transparency and reproducibility, this work aims to support further research, facilitate regional comparisons, and enhance reservoir evaluation across the Gulf of Suez.The Gulf of Suez is one of a Neogene continental rift system, marking the boundary between the African and Arabian plates (Figure 1a). It is a key site for studying continental breakup and earlystage oceanic basin formation (Bosworth et al., 1998;Bosworth and McClay, 2001;Evans, 1988;McClay et al., 1998;Moustafa and Khalil, 2020). The syn-rifting commenced in the late Oligocene, progressed during the Miocene, and waned by the late Miocene, which shaped a series of asymmetric mega-half grabens with complex fault system. The uplift and tilting of fault blocks exposed largely the extensive stratigraphic record, ranging from the Precambrian basement to recent deposits. During the Miocene, the extensional tectonic regime generated significant accommodation space for the deposition of thick sedimentary sequence, with syn-sedimentary faulting (Ayyad et al., 2023;Bosworth et al., 1998;El-Naby et al., 2009;Henaish et al., 2023;Moustafa and Khalil, 2020;Segev et al., 2017). The Miocene succession consists of clastics, carbonates, and anhydrite interbeds deposited in fluvial, restricted and shallow marine settings, which is divided into the Gharandal Group (Lower Miocene) and the Ras Malaab Group (Middle to Upper Miocene). The Gharandal Group consists of Nukhul and Rudeis Formations. The Ras Malaab Group is subdivided into the Kareem, Belayim, South Gharib, and Zeit Formations. Our study interval, Sidri Member, is a part of the Belayim Formation (e.g., Al-Husseini, 2012;Bosworth and McClay, 2001;El-Azabi et al., 2024;Evans, 1988;Sallam et al., 2019;El-Naby et al., 2010). (https://www.arcgis.com/). c) Lithologic profile of the middle Miocene sandstone-shale sequence (Sidri Member) with the upper, middle, and lower units in wells 112-82 and BB4 (revised from Lee et al., 2025). Sandstone grain size: very fine (vf), fine (f), medium (m), and coarse (c). d) Composite profile and isopach maps of the Sidri sandstone units across the 6 × 11 km 2 area (see Figure 1b for location), visualized using the BasinVis 2.0 program (Lee et al., 2016(Lee et al., , 2020)). Contour interval: 5 m.This study investigates the middle Miocene Sidri Member in the Belayim oil field, central Gulf of Suez (Figure 1b). The Sidri Member comprises interbedded sandstone and shale, consisting of three primary sandstone units delineated by thin calcareous shale layers (Abd El Rahman et al., 2012;Fathy, 2012;Lee et al., 2025). In well 112-82, the Sidri Member is ~64 m thick, with the main sandstone interval (~33 m) between depths of 2555-2588 m. Well BB4 records a total thickness of ~30 m, with sandstone units up to 18 m thick between 2600-2618 m (Figure 1c). Lateral and vertical facies changes, reaching up to 117 m in thickness and exhibiting significant lateral variation (Figure 1d), reflect the influence of syn-rift tectonics, depositional environments, and sea-level changes (Lee et al., 2025).Discrete core samples from the Sidri sandstone units in wells 112-82 and BB4 (Figure 1c) were collected and subjected to comprehensive petrophysical analyses in the laboratories of Petrobel Service Company, Egypt (Fathy, 2012). To prepare the samples for analysis, a cold solvent extraction process was used for cleaned-state core testing. Chloroform was applied to remove residual hydrocarbons, while methanol was used to eliminate water and any remaining salts. Chemical and visual inspections ensured the complete removal of contaminants. After cleaning, the core plugs were dried in an oven at 60°C with 40% relative humidity until their weights stabilized. Once dried, the plugs were transferred to desiccators partially filled with silica gel and allowed to cool to ambient temperature. Once thermal equilibrium was reached, key petrophysical parameters were measured.The petrophysical dataset obtained from these analyses includes grain and bulk density, porosity, pore-throat radius, horizontal and vertical permeability, as well as water and oil saturation values, which are available in Table S1.Density and porosity measurements were conducted using the helium gas expansion porosimeter technique, which operates based on Boyle's Law, and the mercury injection method, utilizing a positive displacement mercury pump (e.g., Pittman, 1992). Corex Services Limited used a double cell helium expansion gas porosimeter to measure the porosity and grain density of the samples. The porosimeter functions by first filling a sealed reference chamber with helium gas at room temperature to a pressure of 100 psi. The sample is placed in a separate sealed chamber connected to the reference chamber via a two-way valve. When the valve is opened, the helium expands into the combined volume of both chambers. By applying Boyle's Law, the volume of the sample chamber can be determined using the known values of the reference chamber volume, initial pressure, and final pressure after expansion. Before analyzing samples, the instrument was calibrated by running a series of stainless steel blanks to generate a calibration curve of blank volume versus the inverse of the final pressure. This data was processed using a computer program that applied linear regression to establish an equation for calculating grain volume. Once the grain volume was determined, porosity and grain density were calculated using the bulk volume and weight of each sample. The porosity was calculated by using the following equations;□□ □□ = □□ □□ -□□ □□ ф = □□ □□ × 100 □□ □□ □□ □□ = □□ □□ □□ □□Where □□ □□ , □□ □□ , □□ □□ : pore, bulk, grain volume, respectively; ф: porosity; □□ □□ : grain density; □□ □□ : sample weight. To ensure strict quality assurance, a series of standard samples with known dimensions, porosity, and grain density are tested every 25 samples to verify measurement repeatability. Additionally, to assess data reproducibility when using the same equipment with different operators, predefined acceptance criteria are applied: ±0.2% for □□ □□ , ±0.01 g/cc for □□ □□ , ±0.2% for ф, and ±4% for permeability.The mercury injection method can be used to measure the displacement pressure required to establish a connected hydrocarbon filament within pore throats. The bulk volume of each core plug sample was determined with a positive displacement mercury pump, which consisted of a stainless steel high-pressure pycnometer serving as the sample receptacle. This pycnometer was connected to a volumetric pump cylinder. As the handwheel attached to the pump was rotated, mercury was either injected into or withdrawn from the sample chamber. A digital transducer connected to the pump recorded the displaced mercury volume, providing precise bulk volume measurements. In practice, mercury was first introduced into the sealed, empty pycnometer up to a predefined reference point, and the transducer was zeroed. This process was repeated multiple times to ensure accuracy. The mercury was then withdrawn, and the core sample was placed inside and sealed within the pycnometer. Mercury was reintroduced to the same reference point, and the transducer reading was recorded. This value was then converted into the actual bulk volume of the sample using a correction factor derived from calibration volumes. To maintain accuracy, the mercury was cleaned, and the pump was recalibrated after every four samples, depending on the sample type.To estimate pore-throat parameters from routine core analysis, an empirical equation was developed (Kolodzie, 1980). This equation establishes a relationship between porosity, permeability, and porethroat size corresponding to a mercury saturation level of 35% (R35), showing the strongest correlation (highest R-value). Furthermore, R35 was found to be useful in delineating commercial hydrocarbon accumulations, particularly in stratigraphic traps.□□□□□□□□ 35 = 0.732 + 0.588□□□□□□□□ -0.864□□□□□□фWhere □□ 35 : pore throat radius at 35% mercury saturation; □□: air permeability; ф: porosity.Permeability measurements were conducted using a Nitrogen Permeameter, following standard procedures (e.g., Tiab and Donaldson, 2016). Clean, dry core samples were placed in a Hassler-type core holder, designed to accommodate samples with a one-inch diameter and up to two inches in length. An overburden pressure of 400 psig was applied to the cell, compressing the rubber sleeve around the circumference of the sample to simulate in-situ conditions and prevent gas bypass.Nitrogen gas pressure was then applied to one end of the sample, while the opposite end remained open to atmospheric pressure, creating a pressure gradient that induced gas flow through the sample.The gas flow rate was measured at the low-pressure (downstream) end by directing the gas through one of four calibrated laminar flow orifices and recording the differential pressure across the orifice.The core sample's length was measured using calipers, and its bulk volume was determined by mercury displacement. These parameters, along with the upstream and downstream pressures, gas flow rate, nitrogen viscosity, barometric pressure, and temperature, were input into Darcy's equation to calculate gas permeability (in millidarcies, mD).□□ □□ = 2000 × □□ □□ × □□ □□ × □□ × □□ (□□ 1 2 -□□ □□ 2 ) × □□Where □□ □□ : gas permeability (mD); □□ □□ : barometric pressure (atm); □□ □□ : gas flow rate (cc/sec); □□: gas viscosity (cp); □□: core length (cm); □□ 1 : upstream pressure (atm); □□: core cross sectional area perpendicular to the direction of flow (cm 2 ). To ensure measurement accuracy, a suite of standard samples with known nitrogen permeability was tested every 25 samples as a quality control measure. Some samples were damaged/fractured thus unsuitable for permeability measurement.The Dean Stark method was used for determining fluid saturations in core plugs, which involves the distillation of water from the sample, with being condensed and collected in a calibrated receiver (Dandekar. 2013). The oil is extracted using a solvent with a boiling point higher than that of water. This allows the water to evaporate as the solvent vapor heats up, while the solvent vapor continuously drips on the core sample, facilitating oil extraction. Once the water and oil have been fully removed, the core sample is dried and weighed. The difference in weight represents the combined weight of the extracted oil and water. To isolate the weight of the oil, the amount of water collected in the receiver is subtracted from the total liquid weight. To calculate the water and oil contents as a percentage of the pore space, measurements of porosity, bulk volume, and the specific gravity of the extracted oil are taken (Dandekar, 2013). This method allows for accurate determination of fluid saturations, which is essential for understanding reservoir characteristics and optimizing fluid extraction processes.This study presents values of grain density, bulk density, porosity, pore-throat radius, horizontal permeability, vertical permeability, oil saturation, and water saturation (Figure 2), evaluated based on measurements using core samples from wells 112-82 and BB4. The complete dataset is provided in Table S1. These petrophysical properties are analyzed in the following subsections to assess their variability and implications for reservoir quality. Grain density in well 112-82 averages approximately 2.67 g/cm³, ranging from 2.56 to 2.8 g/cm³ (Figure 2a), while, in well BB4, it averages around 2.69 g/cm³ with a range of 2.59 g/cm³ to 2.79 g/cm³ (Figure 2g). These values are close to the density of quartz (2.65 g/cm³), reflecting major mineral component. Minor variations are affected by the presence of feldspar, lithic fragments, and cementation by carbonates and clays. The higher grain density observed in the upper section of well 112-82 reflects increased cementation (Lee et al., 2025).Bulk density varies from 1.83 g/cm³ to 2.59 g/cm³ (2.3 g/cm³ on average) in well 112-82 (Figure 2b) and from 1.99 g/cm³ to 2.59 g/cm³ (2.38 g/cm³ on average) in well BB4 (Figure 2h). Bulk density shows an inverse correlation with porosity (Figure 2c, i), indicating that intervals with lower bulk density exhibit higher porosity.In well 112-82, porosity values range from 3.6% to 30% with an average approximately 13.8% (Figure 2c). The lower sandstone unit exhibits the higher porosity with an average of ~19.5%, while the middle and upper sandstone units display lower porosity with an average of ~7.6%. The porosity in the lower unit aligns with typical sandstone properties at comparable burial depths (e.g., Lee et al., 2020), whereas the reduced porosity in the middle and upper units is attributed to extensive cementation. Particularly, carbonate minerals, such as calcite and dolomite, precipitated within pores and pore throats, significantly influencing porosity variations (e.g., Lee et al., 2021). In well BB4, porosity values generally trend lower, ranging from 3.8% to 25.5%, with an average of 11.5%, and distributing mostly below 10% with sporadic peaks (Figure 2i). In both wells, intervals with higher porosity are evaluated as good to excellent reservoir quality (Lee et al., 2025). A lateral difference in porosity correlates with increasing shale content (e.g., El-Kadi et al., 2015;Mohaned et al., 2024).Pore-throat radius in well 112-82 ranges from 0.05 μm to 17.34 μm, with an average of 4.3 μm (Figure 2d). The lower sandstone unit shows a wide range of pore-throat size, corresponding to variations in porosity. Larger pore-throat radii in this unit suggest better connectivity between pores, enhancing fluid flow and reservoir quality. In well BB4, the pore-throat radius varies from 0.4 μm to 18.3 μm, averaging 4.2 μm (Figure 2j).In well 112-82, horizontal permeability varies widely from <0.01 to 1309 mD, with an average of 167.7 mD, reflecting in pore and connectivity (Figure The units significant the lower unit exhibiting higher values from <0.01 to 1309 on average) pore and higher reservoir quality, while the middle and upper units lower permeability mostly from <0.01 to mD, with peaks up to mD, due to extensive cementation pore permeability in well 112-82 a ranging from <0.01 to mD, with an average of In well BB4, horizontal permeability ranges from to mD, averaging (Figure An interval in the middle unit shows permeability values up to mD, corresponding to a (Figure 2i). permeability in well BB4 varies from to with an average of In both wells, horizontal permeability is generally higher than vertical permeability, due to grain of pore and during which lateral fluid flow and well 112-82, oil saturation ranges from to with an average of (Figure intervals are reaching up to at m and up to at m. In well BB4, oil saturation varies between and averaging (Figure are at m and at m. The with oil saturation to intervals of lower bulk density, higher porosity, and increased permeability, indicating good to excellent reservoir quality. The difference in oil saturation between the wells reflects their structural well 112-82 within a major while well BB4 is on a fault (Lee et al., 2025). saturation values an inverse relationship with oil saturation; water saturation ranging from to in well 112-82 and from to in well BB4 (Figure study analyzed the petrophysical properties of the middle Miocene sandstone (Sidri Member) using core samples from wells 112-82 and BB4 in the Belayim oil field, central Gulf of Suez. were including helium gas expansion porosimeter for density and porosity, mercury injection for pore throat radius, nitrogen for permeability, and the Dean Stark method for in both wells, grain density varies averages around , and bulk density ranges from to in well 112-82 and in well BB4. radii range from 0.05 to μm and from 0.4 to 18.3 μm, permeability a from <0.01 to 1309 in well 112-82 and from to in well BB4, with vertical permeability reaching <0.01 to and to horizontal permeability is attributed to grain and saturation exhibits values in reaching up to in well 112-82 and up to in well BB4, which has an inverse correlation to water The observed petrophysical variability reflects the complex interplay of depositional environments, tectonic and diagenetic which to the good to excellent reservoir quality. These to enhance our understanding of the Sidri Member and its evolution in the of the Gulf of Suez. petrophysical data reveal insights into reservoir quality and which reservoir and and structural variations control fluid flow and hydrocarbon This knowledge is key for improving reservoir well and while also on broader processes in this significant syn-rift