The 3D-MAGIC project : Design and production of electromagnetic absorbers using 3D printing
The main objective of the 3D-MAGIC project was to design and manufacture absorbers in the microwave range (2 to 20 GHz), using a lossy materials structuring approach and additive manufacturing. The project was divided into three different phases. The first one involved the building of a "Materials" database, by defining compositions and measuring electromagnetic properties. The second one was to design and simulate structured broadband absorbers. The third phase dealt with the experimental validation of 3D-printed RF absorbers with a selected composite. In the end, two demonstrators were produced and featured expected performances in terms of absorption in the desired frequency range.
Authors
- Erika Vandelle (ORCID: https://orcid.org/0000-0001-7497-4009)
- Nicolas Penin (ORCID: https://orcid.org/0000-0003-1481-9220)
- Catherine Elissalde (ORCID: https://orcid.org/0000-0003-1911-1870)
- Christophe Galindo
- Jean‐François Silvain (ORCID: https://orcid.org/0000-0002-5881-6833)
- Mario Maglione (ORCID: https://orcid.org/0000-0002-5747-8879)
- A. Visse
- Thang Hoang (ORCID: https://orcid.org/0000-0003-2229-3863)
- Jean‐Marc Heintz (ORCID: https://orcid.org/0000-0002-1082-5714)
- Teddy Fournier
- Brigitte Loiseaux (ORCID: https://orcid.org/0000-0001-6679-2934)
- Y. Vermosen
Institutions
- Centre National de la Recherche Scientifique (FR)
- Institut de Chimie de la Matière Condensée de Bordeaux (FR)
- Laboratoire Albert Fert (FR)
- Institut Polytechnique de Bordeaux (FR)
Publication Details
- Published
- 2024-10-21
- DOI
- https://doi.org/10.1109/radar58436.2024.10993547
- Primary Topic
- Augmented Reality Applications
- Type
- article
- Field-Weighted Citation Impact
- 0.00