Simulation of Internal Environmental Conditions Within Rock Wool Insulation: Implications for Corrosion Under Insulation in Piping Systems

Rock wool is widely used in industrial piping systems for its excellent thermal insulation properties, but its porous structure allows water infiltration that can lead to corrosion under insulation (CUI) on metal pipe surfaces. In order to investigate how water infiltration into the insulated pipeline system creates a corrosive environment, a study on the flow behavior of fluids in porous media was conducted. Experiments were performed to measure the flow velocity and pressure drop along three principal directions—axial, radial, and circumferential. These measurements enabled the derivation of specific viscous and inertial resistance coefficients, which characterize the flow through the rock wool structure. The results indicated that the flow parameters of rock wool change over time and with repeated use, particularly after dry–wet cycles. The experimentally derived parameters were incorporated into both small-scale and large-scale three-dimensional computational fluid dynamics (CFD) models to simulate water transport within the rock wool insulation layer. Validation experiments performed on a real rock wool-insulated pipeline system confirmed the predictive accuracy of the CFD simulations in capturing water movement through the insulation. The large-scale model further analyzed the influence of inlet velocity, rock wool aging, and pipeline inclination on the development of environmental conditions for CUI.