Drawing of Newtonian hollow fibres: effects of surface tension, cooling, internal pressurisation and inertia on steady states and stability

We consider the drawing of a hollow Newtonian fibre with temperature-dependent viscosity. The drawing is affected by surface tension, inertia, hole pressurisation and externally applied cooling. We apply long-wavelength techniques to determine the steady states and examine their stability. In the presence of surface tension but with no cooling or internal hole pressure, we show the counter-intuitive result that the hole radius at the outlet of the device is a non-monotonic function of the hole radius at the inlet. We also show that if the internal hole is pressurised and the hole size at the inlet is sufficiently large, then the exit temperature of the fibre is a non-monotonic function of the applied cooling rate. We have found a number of surprising mechanisms related to how the various physical effects influence the stability of drawing. For the isothermal case, we show that increasing the internal hole pressure has a destabilising effect for non-zero surface tension while the stability is completely independent of the internal hole pressure for zero surface tension. We further show that there is a complicated interplay between internal hole pressure, external cooling and surface tension in determining the stability and that it is possible that increasing the hole size at the inlet can act to destabilise, then stabilise and finally destabilise the flow. We discuss the mechanisms that determine the counter-intuitive steady-state behaviour and stability.