The Cascade PI Controller Design for Hydrogen Electric Bike Systems
The paper presents the cascade PI controller design for a DC/DC converter. The hydrogen is used as the main energy source feeding to the fuel cell stack in which the voltage generated from the fuel cell is fluctuated. As a result, the DC/DC converter is used to regulate the voltage feeding to the electric bike driving systems. The controller design using the standard second order system is proposed. The simulation results from MATLAB/SIMULINK shows that the resulting cascade PI controller can regulate the voltage even the power load level is varied. The considered system with the controller designed by the proposed method can provide the good voltage response until the rated power can be achieved. The ripple voltage in the steady state is under 0.5% following the standard ISO-21780-2020.
Authors
- Tosaporn Narongrit
- Apichai Suyapan (ORCID: https://orcid.org/0000-0002-8275-5647)
- Kongpan Areerak (ORCID: https://orcid.org/0000-0003-4697-3441)
- Wuttinan Surakan
- Monton Niyomthai
Institutions
- King Mongkut's University of Technology Thonburi (TH)
- Suranaree University of Technology (TH)
Publication Details
- Published
- 2025-03-05
- DOI
- https://doi.org/10.1109/ieecon64081.2025.10987674
- Primary Topic
- Advanced Battery Technologies Research
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Suranaree University of Technology