Effect of Heat on Physical, Structural, and Microscopic Properties of Sandstone

This research investigates the engineering properties of sandstone through tests performed prior to and following heat treatment. This study concentrated on evaluating the physical and mechanical properties, such as density, compressive strength, and wave velocities, in conjunction with the mineralogical, Cerchar hardness, and basic geochemical characteristics of the rock. Heat treatment was conducted at different temperatures (35 °C, 200 °C, 400 °C, 600 °C, and 800 °C), followed by analyses utilizing X-ray fluorescence (XRF), thin section analysis, and scanning electron microscopy (SEM) techniques. The results were analyzed to assess the influence of heat treatment on rock properties, utilizing Design Expert software for data evaluation. Numerical analysis with FLAC3D was conducted to validate the observed values at various temperature levels, further investigating the impact of the treatment on the engineering properties of sandstone. A significant finding was the reduction in strength, particularly correlated with a decrease in primary wave velocity, which is associated with an uneven distribution of strength within the rock. Increased temperature results in stress concentrations that facilitate crack formation, while variations in grain size significantly influence crack propagation. This study highlights the substantial influence of temperature on the compressive strength and general material properties of sandstone.