Performance Evaluation of Long-Distance Road Transportation of Roundwood in Mountainous Conditions

In Europe, long-distance transport of wood from landings to consumers is most often carried out by trucks and trucks with trailers. In forests located mainly in mountainous areas with rugged terrain and frequent curves, the construction of forest roads is complicated and often access for trucks with trailers is difficult or there is not enough space on the landing for maneuvers. In these cases, the truck leaves the trailer next to the public road and without it moves to the landing and loads the wood with Palafinger hydraulic crane model Epsilon Kran GmbH mounted on it, which it transfers to the trailer on the way back. Then, the truck moves to the landing to load itself, returns, hooks up the trailer and transports the wood to the customer. This study, conducted in a coniferous stand in Bulgaria, aimed to determine and develop models for the productivity and costs associated with transporting a truck with a trailer and to evaluate the suitability of this method. To study this very common method of long-distance transport, observations were made of 185 turns of a truck with a trailer operating with coniferous wood in Rila-Rhodope Mountain Massif, Southern Bulgaria. It was found that the duration of the working cycle is affected by the total mileage (average 65.41 km), the volume of the load and the number of logs. The productivity with and without delays, 7.80 and 7.30 m3/h, respectively, is affected by the mileage and the volume of the wood, while the corresponding transportation productivity (177.46 and 167.24 m3 km/h) is affected by the transport distance loaded and the volume of the load. To increase efficiency and reduce the cost of transporting wood over long distances, investments are needed to improve forest roads to eliminate the need to uncouple the trailer.