Numerical analysis of molten iron flow and heat transfer in plumbing casting defect detection using split tracking approach

Gravity sand casting, widely utilised in plumbing manufacturing for metal part production, is the focus of this research to enhance its efficiency. Computational Fluid Dynamics (CFD) was employed to address molten flow, solidification, and cooling dynamics to reduce surface and internal defects. FLOW-3D CAST software was utilised with Volume of Fluid (VOF) method to examine flow patterns during the filling and solidification process. Suitable riser locations, quantities, and sprue placements were determined, emphasising their critical role in enhancing quality. The control of crystallisation temperatures and accurate positioning of pouring caps were also highlighted. Insights into refining gravity sand casting are provided, laying the groundwork for future CFD validation studies to confirm defect reduction in air valve production and further improvements in process parameters. Rapid filling within 20 seconds at 1550°C influenced a 740-second solidification process. Key solidification phases between 100 and 600 seconds were crucial for improving casting efficiency and quality. Proper riser and sprue configurations were found to be essential for process efficiency and waste reduction, demonstrating economic benefits for sustainable manufacturing practices. Enhanced accuracy in simulating fluid dynamics during casting was achieved by benchmarking Split Lagrangian tracking schemes against other methods, which is critical for predicting process behaviours. • Optimal riser locations, quantities, and pouring sprue placements were identified using FLOW-3D CAST software with the Volume of Fluid (VOF) method, emphasising control over crystallisation temperatures and pouring cap positioning. • Split Lagrangian tracking schemes were benchmarked to enhance accuracy in simulating fluid dynamics during casting, contributing to better predictions of process behaviours. • Economic benefits were demonstrated through reduced waste and enhanced casting efficiency by optimising riser and sprue configurations, promoting sustainable manufacturing practices. • The parameters' critical role in improving casting quality, minimizing defects, and informing future validation and refinement studies for double air valve production was highlighted.