The Effect of Industrial Byproducts Fly Ash and Quartz Powder on Cement Properties and Environmental Benefits Analysis

Using industrial byproducts to replace cement is an important way to reduce carbon emissions from the cement industry. In this study, the effects of two industrial byproducts, fly ash (FA) and quartz powder (QZ), as supplementary cementitious materials (SCMs) on the macroscopic properties and microstructure of cement-based materials were experimentally investigated. The results of the compressive strength and ultrasonic pulse velocity experiments showed that QZ significantly mitigated the decrease in strength and ultrasonic pulse velocity caused by the reduction in cement dosage in the early stage. Moreover, the 28-day compressive strength of the FA group was comparable to that of the control group, and regression analysis indicated a negligible effect of FA addition on 28-day compressive strength. X-ray diffraction and Fourier transform infrared spectroscopy experiments showed that QZ can promote the hydration reaction in the early stage. Scanning electron microscopy images revealed that a layer of hydration products can form on the surface of FA after 28 days of hydration. Hydration heat experiments indicated that FA significantly reduces the release of hydration heat, while QZ promotes the formation of ettringite through nucleation effects in the early stage of hydration, thereby accelerating the release of hydration heat. Thermogravimetric analysis after 28 days showed that the amount of hydration products and calcium hydroxide produced decreased with the addition of cementitious materials. Finally, the use of FA and QZ was analyzed for carbon emissions and energy consumption. The results showed that using these two cementitious materials significantly reduces carbon dioxide emissions and energy consumption.