Using Intensified Flotation Cells to Improve Cleaning Circuit Performance

The cleaning circuit of the collective Cu-Mo flotation plant at Collahuasi (north of Chile) consisted of two parallel flotation rows, each one of three first cleaner cells in series with six cleaner–scavenger cells. The second cleaner consisted of 10 parallel columns (6 rectangular and 4 circular), whose tailings were directly recycled to the first cleaner. Recently, a project was developed to upgrade the cleaning circuit by decreasing the large Mo circulating load and improving the cleaning circuit performance. For this purpose, a testing strategy was set up at a pilot scale to evaluate the use of intensified flotation (Jameson cells), mainly for collecting the fine Mo particles accumulated in the circulating load, which contributes to the Mo losses from the scavenger stage into the final tailings. The preliminary results regarding kinetics at the pilot scale showed good potential to improve the metallurgical performance of Mo and Cu, and a sensitivity study was carried out to evaluate the application of this technology in the industrial cleaning circuit. Then, two parallel Jameson cells were selected to re-treat the whole column tailings stream. This operation allowed for the generation of a direct final Cu-Mo concentrate (that joins the columns concentrate) while recycling their tailings to the first cleaner. After commissioning, three sampling campaigns were performed on the whole flotation plant, particularly on the overall cleaning circuit, to evaluate the impact of the new flotation cells. Results showed that the Jameson cells effectively decreased the minerals circulating loads in the cleaning stage, mainly for Mo (in 49%). The Jameson cells directly contribute 48% of Mo and 25% Cu of the minerals in the final concentrate and allow for increasing the Mo final grade (0.45% Mo vs. 0.29% from columns). These results were in good agreement with predictions from the pilot testing.