Polyethylene glycol-magnetite composite encapsulated concrete as a thermal energy storage

Polyethylene glycol (PEG), as an organic PCM, has great potential for Thermal Energy Storage (TES) applications, particularly in concrete. PEG has high latent heat, wide transition temperature range, thermal stability, and biocompatibility. However, the low thermal conductivity of PEG is a disadvantageous. In this study, magnetite (Fe 3 O 4 ) was added as a filler to improve the thermal performance of PEG. The synthesis and homogenization were performed via sonication and magnetic stirring. XRD characterization showed that the PEG-magnetite composite did not undergo any chemical reaction or form new phases. The addition of 45 vol% of magnetite increased the magnetization saturation to 29.84 emu/g and decreased the latent heat to 79.73 %. Thermogravimetric analysis showed an increase in the decomposition temperature of up to 18.54 %. The PEG85 composite sample, with a latent heat of 128.06 J/g and thermal conductivity of 0.407 W/m⋅°C is the most suitable for TES. The novel configuration of tubes encapsulation media to store PEG-magnetite composite improves the capability of the concrete to act as a thermal energy storage. • Polyethylene glycol (PEG) were used as phase change materials. • Magnetite particles were use to improve the thermal properties in PEG. • Concretes were used formation (vertical and horizontal) of tube encapsulation. • Phase change materials were macro-encapsulated in tubes. • Macro-encapsulation medium for PCM using copper tubes.