Experimental Evaluation of the Impact on Turbo Engine’s Performance and Gaseous Emissions While Using n-Heptane Octanol/Jet-A Blends

This paper investigates how octanol, used as a renewable additive in Jet A fuel, influences the performance and emissions of aviation micro-turbo engines. Blends containing 10%, 20%, and 30% octanol, with an additional 5% n-heptane, were tested to closely replicate Jet A’s physical–chemical properties. Mathematical models validated using density and viscosity data achieved accurate predictions, with maximum absolute errors of 0.0018 g/cm3 for density and 0.4020 mm2/s for viscosity. Performance assessments showed that fuel consumption increased due to octanol’s lower calorific value, requiring higher fuel flow to sustain engine speed. Combustion temperature variations ranged from a decrease of 5.38% in Regime 1 (30% octanol) to increases of up to 1.47% and 1.13% in Regimes 2 and 3, respectively, without compromising engine stability. Thrust variations were minimal, with decreases up to 0.72% observed at 30% octanol concentration. Emission analysis indicated significant reductions in CO and NOx levels with increased octanol content, attributed to enhanced combustion completeness and additional oxygen availability. SO2 emissions also decreased slightly due to the lower sulfur content. Thermal efficiency marginally declined from 5.04% (Jet A) to approximately 4.92–4.97% for octanol blends. These findings support octanol as a viable sustainable additive, offering substantial emission benefits with only minor efficiency trade-offs.