Biodegradable and Reusable Sponge Material Prepared from Pea Protein for the Effective Removal of Heavy Metals

There is a growing demand for biodegradable and sustainable materials, particularly those sourced from agricultural or industrial byproducts, for use in wastewater treatment. This study introduces an approach for developing a sponge-like adsorbent derived exclusively from pea protein (Pea<sub>AS</sub>-PEI) using liquid foam templating for the removal of heavy metals. The pore size, surface area, and mechanical strength of the sponge were modulated by the extent of protein hydrophobic aggregation induced by ammonium sulfate (AS) immersion based on the salting-out effect. Raising AS concentration from 10 to 20% led to an increase in surface area from 30.69 to 127.41 m<sup>2</sup>/g and compressive stress from 151.02 ± 8.73 kPa to 316.10 ± 13.87 kPa at 90% strain. Polyethylenimine (PEI) grafting introduced additional amine groups for heavy metal adsorption, and the porosity of the sponge increased from 86.9 to 90.3% upon surface modification. As a result, the PEI-modified sponge showed favorable adsorption performance of Cu(II), Zn(II), and Ni(II) ions at pH 5 with maximum sorption capacities of 67.07, 115.61, and 55.86 mg/g, respectively. The adsorption kinetics and isotherm study suggested that the adsorption process was primarily chemisorption and occurred with monolayer interactions. The negative Gibbs free energy change (Δ<i>G</i> < 0) confirmed that the adsorption was thermodynamically spontaneous. Reusability tests for the Pea<sub>AS</sub>-PEI sponge revealed that its adsorption capacity could be well maintained over five successive adsorption-desorption cycles, with the removal efficiency of Cu(II) over 95%. The pea protein sponge also exhibited excellent biodegradability in soil within 28 days, with weight losses of 86.1% and 67.5% before and after PEI grafting, respectively. Together, these results indicate the great potential of affordable and sustainable PEI-modified pea protein sponges for the remediation of water polluted with copper, zinc, and nickel ions.

Authors

Institutions

Publication Details

Journal
ACS Applied Materials & Interfaces
Published
2025-04-26
DOI
https://doi.org/10.1021/acsami.4c22940
Citations
1
Primary Topic
Adsorption and biosorption for pollutant removal
Type
article
Field-Weighted Citation Impact
0.82

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

Biodegradable and Reusable Sponge Material Prepared from Pea Protein for the Effective Removal of Heavy Metals

Yifu Chu, Peineng Zhu, Lingyun Chen, Fengmin Li
1 citations
ACS Applied Materials & Interfaces
Adsorption and biosorption for pollutant removal
0.82
article

Biodegradable and Reusable Sponge Material Prepared from Pea Protein for the Effective Removal of Heavy Metals

Yifu Chu, Peineng Zhu, Lingyun Chen, Fengmin Li
article en
1 citations

Abstract

There is a growing demand for biodegradable and sustainable materials, particularly those sourced from agricultural or industrial byproducts, for use in wastewater treatment. This study introduces an approach for developing a sponge-like adsorbent derived exclusively from pea protein (Pea<sub>AS</sub>-PEI) using liquid foam templating for the removal of heavy metals. The pore size, surface area, and mechanical strength of the sponge were modulated by the extent of protein hydrophobic aggregation induced by ammonium sulfate (AS) immersion based on the salting-out effect. Raising AS concentration from 10 to 20% led to an increase in surface area from 30.69 to 127.41 m<sup>2</sup>/g and compressive stress from 151.02 ± 8.73 kPa to 316.10 ± 13.87 kPa at 90% strain. Polyethylenimine (PEI) grafting introduced additional amine groups for heavy metal adsorption, and the porosity of the sponge increased from 86.9 to 90.3% upon surface modification. As a result, the PEI-modified sponge showed favorable adsorption performance of Cu(II), Zn(II), and Ni(II) ions at pH 5 with maximum sorption capacities of 67.07, 115.61, and 55.86 mg/g, respectively. The adsorption kinetics and isotherm study suggested that the adsorption process was primarily chemisorption and occurred with monolayer interactions. The negative Gibbs free energy change (Δ<i>G</i> < 0) confirmed that the adsorption was thermodynamically spontaneous. Reusability tests for the Pea<sub>AS</sub>-PEI sponge revealed that its adsorption capacity could be well maintained over five successive adsorption-desorption cycles, with the removal efficiency of Cu(II) over 95%. The pea protein sponge also exhibited excellent biodegradability in soil within 28 days, with weight losses of 86.1% and 67.5% before and after PEI grafting, respectively. Together, these results indicate the great potential of affordable and sustainable PEI-modified pea protein sponges for the remediation of water polluted with copper, zinc, and nickel ions.

ACS Applied Materials & InterfacesVol. 17(18)
University of Alberta (CA), Ministry of Ecology and Environment (CN), Ocean University of China (CN)
Alberta Pulse Growers Commission, Canada Research Chairs, Natural Sciences and Engineering Research Council of Canada
Zero hunger
Openalex Percentile: Top 27%
Adsorption and biosorption for pollutant removal
0.82
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.