The Laser Powder Bed Fusion of Nd2Fe14B Permanent Magnets: The State of the Art

In recent years, significant effort was made to make the 3D printing of fully dense rare-earth permanent magnets a reality. Since suitable Nd2Fe14B-based initial powder material became available, additive manufacturing implementation spread widely, which led to many studies being focused on using this material in 3D printing. This study shows the principal possibilities of the synthesis of Nd-Fe-B magnets by means of the laser powder bed fusion technique; moreover, this study shows significant progress in increasing their magnetic properties. This progress was made possible by different approaches, such as 3D-printing process optimization, the addition of a second phase (a low-melting eutectic) into the initial powder, the tuning of the main phase’s composition, and exploring different scanning strategies. However, the current level of material magnetic properties obtained via laser powder bed fusion is still far from that of magnets produced by using conventional powder metallurgy methods. The present review aims to capture the current state-of-the-art trials and highlight the main challenges.