Effect of Co and Al Content on CrFeNiMo-System High Entropy Alloys Produced by Mechanical Alloying

This study aims to investigate the Co content on a Co_xCrFeNiMo (x = 0; 0.5) high entropy alloy (HEA) but also the effects of replacing the Co element with Al in terms of single-phase structure forming, processing behavior, and microstructural characteristics when being processed by mechanical alloying with a planetary ball mill. Recent HEA-related research aimed toward identifying the effect that certain alloying elements in different concentrations influence the microstructure and properties but also regulate their composition. HEAs present promising properties (e.g., corrosion and wear resistance) being applicable in domains that require protection against harsh environmental conditions, benefiting from the specific core effects of this type of material. To obtain a high alloying and homogenization degree, for this research, mechanical alloying was selected for processing the mixtures, with the aid of N-Heptane as a process control agent (PCA). The mixtures were monitored in terms of alloying degree evolution, elemental distribution, particle morphology, crystalline structure, and also technological characterization (packing ratio, free flow, and slope angle). The results indicated that a high degree of alloying was obtained after 30 h of solid-state processing, with notable crystallization of two major phases FCC and BCC identified confirming the HEA phase stability calculations.