A Bacteria Acclimation Technology Based on Nitrogen Source Regulation and Its Application in the Reinforcement of Island and Reef Slopes

Microbially Induced Calcium Carbonate Precipitation (MICP) technology has garnered significant attention in geotechnical engineering and environmental remediation due to its environmentally friendly and cost-effective advantages. However, the current MICP technology faces challenges in practical engineering applications, particularly the prolonged cementation time, which makes it difficult to meet the requirements for coastal slope reinforcement. Therefore, this study designed novel cultivation conditions for Sporosarcina pasteurii by regulating external nitrogen source concentration and evaluated its environmental adaptability by measuring OD600, urease activity, and bacterial length. By monitoring the changes in Ca2+ concentration, pH, and precipitation rate over time during the mineralization process, rapid cementation under MICP conditions was achieved. The engineering applicability of this approach in slope reinforcement was comprehensively assessed through simulated on-site scouring and penetration tests. The reinforcement mechanism and the microstructure of the cementation under novel cultivation conditions were analyzed using scanning electron microscopy (SEM), energy dispersive spectrometry (EDS), and X-ray diffraction (XRD). The results indicated that the activity of Sporosarcina pasteurii in the modified NH4-YE medium significantly improved in freshwater environments, and the MICP mineralization reaction was rapid, completing within 4 h. The primary crystal form of the generated precipitate was rhombohedral calcite, which formed a tightly bonded microstructure with calcareous sand, achieving a maximum reinforcement strength of 13.61 MPa. The penetration strength increased by at least 20%, and the precipitation rate improved by at least 2-fold. The scouring morphology remained essentially unchanged within 6 h. The findings of this study provide foundational and theoretical data for the application of MICP reinforcement technology to coastal calcareous sand models.