Protection of custom satellite antennas for deep-sea monitoring probes: Insights from the SONDA project

This study presents the development and testing of satellite antennas for the SONDA probe, an innovative deep-sea monitoring system designed to be deployed by high-altitude balloons. The probe descends to the deep ocean, resurfaces, and transmits data while functioning as a drifter. The project faced unique design constraints, including the need for low-cost materials and lightweight construction for balloon deployment. These constraints ruled out traditional hermetic housings, necessitating alternative solutions for antenna protection. The work focused on custom ceramic patch antennas and their performance under various protective coatings, which affected the antennas’ resonance and gain. Thinner layers effectively protected the antennas from high-pressure conditions and water ingress, maintaining functionality. Experiments on antenna height revealed optimal positioning above the water surface to minimize wave-induced signal interference. Hyperbaric chamber tests validated the mechanical integrity and functionality of the antennas under pressures equivalent to depths of 1500 m Antenna characterization techniques were employed in an anechoic chamber to validate antenna performance with the coating and to assess their correct operation after the hyperbaric tests. Field deployments demonstrated the antennas’ capability to transmit data after diving. Challenges included communication delays, corrupted data, and mechanical vulnerabilities in materials. The findings emphasize the importance of rigorous mechanical design, material selection, and system optimization to ensure reliability in marine environments. This work advances the development of low-cost, lightweight, and modular probes for autonomous ocean monitoring, with potential applications in long-term drifter studies, real-time marine monitoring and oceanographic research.