High-temperature stability of aluminosilicate glass particle pellets and its dependence on chemical composition

• We set up a method to determine high-temperature stability (HTS) of stone wool. • The method is based on use of glass particle pellets as a proxy for HTS tests. • Glass particle size is a crucial factor to be considered for evaluation of HTS. • Substitution of MgO for FeO and MgO for FeO strongly impact HST of particle pellets. • Such substitution has a drastic influence on crystallisation of glass particles. Mineral wool, especially stone wool, is a sustainable, fire-safe insulation material. Its fire safety depends, amongst other factors, on its high-temperature stability (HTS), that is, its resistance to volumetric shrinking during heating. Using glass particle pellets as an analogue for mineral wool fibres, we observed a positive correlation between particle size and HTS, as well as between particle size and crystallisation temperatures, and an inverse correlation between particle size and the degree of iron oxidation upon heating. To investigate the composition dependence of HTS, we prepared two series of aluminosilicate glass particle pellets: one with varying MgO/(MgO+CaO) molar ratio (referred to as the CaO-MgO series) and another with varying MgO/(MgO+FeO) molar ratio (referred to as the FeO-MgO series). The results showed that substituting MgO for CaO resulted in decreased glass stability, a lowered onset temperature of shrinking, a reduced shrinking rate, and an increased HTS. In comparison, substituting MgO for FeO led to increased glass stability, an increased shrinking rate, and a decreased HTS. Crystallisation occurs right after the glass transition for the FeO-rich FeO-MgO samples and MgO-rich CaO-MgO samples, but a residual glassy phase remains. Upon further heating, the residual glassy phase undergoes viscous deformation, leading to a significantly reduced temperature of the final collapse of the glass particle pellets. This work provides a facile and efficient approach to studying the HTS of glass particle pellets as an analogue for mineral wool fibres.

Authors

Institutions

Publication Details

Journal
Journal of Non-Crystalline Solids
Published
2025-04-23
DOI
https://doi.org/10.1016/j.jnoncrysol.2025.123553
Primary Topic
Glass properties and applications
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

High-temperature stability of aluminosilicate glass particle pellets and its dependence on chemical composition

Qiuju Zheng, Mette Solvang, Yuanzheng Yue, Per Jensen et al.
Journal of Non-Crystalline Solids
Glass properties and applications
article

High-temperature stability of aluminosilicate glass particle pellets and its dependence on chemical composition

Qiuju Zheng, Mette Solvang, Yuanzheng Yue, Per Jensen, Louise Josefine Belmonte, Laura Skovby
article en

Abstract

• We set up a method to determine high-temperature stability (HTS) of stone wool. • The method is based on use of glass particle pellets as a proxy for HTS tests. • Glass particle size is a crucial factor to be considered for evaluation of HTS. • Substitution of MgO for FeO and MgO for FeO strongly impact HST of particle pellets. • Such substitution has a drastic influence on crystallisation of glass particles. Mineral wool, especially stone wool, is a sustainable, fire-safe insulation material. Its fire safety depends, amongst other factors, on its high-temperature stability (HTS), that is, its resistance to volumetric shrinking during heating. Using glass particle pellets as an analogue for mineral wool fibres, we observed a positive correlation between particle size and HTS, as well as between particle size and crystallisation temperatures, and an inverse correlation between particle size and the degree of iron oxidation upon heating. To investigate the composition dependence of HTS, we prepared two series of aluminosilicate glass particle pellets: one with varying MgO/(MgO+CaO) molar ratio (referred to as the CaO-MgO series) and another with varying MgO/(MgO+FeO) molar ratio (referred to as the FeO-MgO series). The results showed that substituting MgO for CaO resulted in decreased glass stability, a lowered onset temperature of shrinking, a reduced shrinking rate, and an increased HTS. In comparison, substituting MgO for FeO led to increased glass stability, an increased shrinking rate, and a decreased HTS. Crystallisation occurs right after the glass transition for the FeO-rich FeO-MgO samples and MgO-rich CaO-MgO samples, but a residual glassy phase remains. Upon further heating, the residual glassy phase undergoes viscous deformation, leading to a significantly reduced temperature of the final collapse of the glass particle pellets. This work provides a facile and efficient approach to studying the HTS of glass particle pellets as an analogue for mineral wool fibres.

Journal of Non-Crystalline SolidsVol. 660
Qilu University of Technology (CN), Rockwool Foundation (DK), Aalborg University (DK)
Carlsbergfondet
Openalex Percentile: Top 94%
Glass properties and applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.