A Parametric Study of Small-Scale Offshore Vertical Axis Wind Turbines: Unlocking Potential in Low Wind Profile Regions

In recent decades, wind turbines have emerged as substantial renewable energy technologies, particularly for offshore applications. However, the utilisation of conventional wind turbine in regions characterised by a low wind speed profile, such as Malaysia, remains limited. To address this gap, this study develops an unconventional small-scale Vertical Axis Wind Turbine (VAWT) provision for offshore application in Malaysia’s low wind speed regions. The study commenced with a wind feasibility analysis which aimed to determine the viable range of offshore wind speeds prior conducting wind tunnel tests. The VAWT model was designed using SolidWorks software, fabricated using a 3D printer and tested in the National Defence University of Malaysia (UPNM) wind tunnel lab facilities. Through a systematic analysis and optimisation of blade diameters, stages and angles using Taguchi method, this study aimed to enhance the wind turbine performance in terms of power coefficient (Cp) and tip speed ratio. The result highlighted the pivotal role of blade diameter and the number of stages as a key design factor for VAWT, with the optimal configuration of blade diameter of 16 cm, a single stage and Angle of Attack (AoA) of 7°, resulted in a Cp value of 0.622. It is important to note that this Cp value exceeds the typical wind turbine power coefficient benchmarks, which range from 0.3 to 0.45, indicating that the optimised design offers a higher-than-average efficiency for small-scale VAWTs. Additionally, variations in AoA were found to be the least significant design factor, as all models demonstrated peak Cp values corresponding to wind speeds. Although tested in a controlled wind tunnel environment, these results suggest that the optimum design could perform efficiently under Malaysia's real-world offshore conditions, where wind speeds are typically low. This study provides key design considerations for small-scale VAWTs in low wind profile regions, contributing to the sustainable development of wind energy in Malaysia.

Authors

Institutions

Publication Details

Journal
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Published
2025-04-20
DOI
https://doi.org/10.37934/arfmts.130.1.3450
Primary Topic
Wind Energy Research and Development
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
article

A Parametric Study of Small-Scale Offshore Vertical Axis Wind Turbines: Unlocking Potential in Low Wind Profile Regions

Norehan Mokhtar, Maidiana Othman, Mohd Rashdan Saad, Jeffrey T. Dellosa et al.
Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Wind Energy Research and Development
article

A Parametric Study of Small-Scale Offshore Vertical Axis Wind Turbines: Unlocking Potential in Low Wind Profile Regions

Norehan Mokhtar, Maidiana Othman, Mohd Rashdan Saad, Jeffrey T. Dellosa, Norzaima Nordin, Mohamed Tarmizi Ahmad, Muhamad Nur Alif Nadzri
article en

Abstract

In recent decades, wind turbines have emerged as substantial renewable energy technologies, particularly for offshore applications. However, the utilisation of conventional wind turbine in regions characterised by a low wind speed profile, such as Malaysia, remains limited. To address this gap, this study develops an unconventional small-scale Vertical Axis Wind Turbine (VAWT) provision for offshore application in Malaysia’s low wind speed regions. The study commenced with a wind feasibility analysis which aimed to determine the viable range of offshore wind speeds prior conducting wind tunnel tests. The VAWT model was designed using SolidWorks software, fabricated using a 3D printer and tested in the National Defence University of Malaysia (UPNM) wind tunnel lab facilities. Through a systematic analysis and optimisation of blade diameters, stages and angles using Taguchi method, this study aimed to enhance the wind turbine performance in terms of power coefficient (Cp) and tip speed ratio. The result highlighted the pivotal role of blade diameter and the number of stages as a key design factor for VAWT, with the optimal configuration of blade diameter of 16 cm, a single stage and Angle of Attack (AoA) of 7°, resulted in a Cp value of 0.622. It is important to note that this Cp value exceeds the typical wind turbine power coefficient benchmarks, which range from 0.3 to 0.45, indicating that the optimised design offers a higher-than-average efficiency for small-scale VAWTs. Additionally, variations in AoA were found to be the least significant design factor, as all models demonstrated peak Cp values corresponding to wind speeds. Although tested in a controlled wind tunnel environment, these results suggest that the optimum design could perform efficiently under Malaysia's real-world offshore conditions, where wind speeds are typically low. This study provides key design considerations for small-scale VAWTs in low wind profile regions, contributing to the sustainable development of wind energy in Malaysia.

Journal of Advanced Research in Fluid Mechanics and Thermal SciencesVol. 130(1)
Caraga State University (PH), National Defence University of Malaysia (MY)
Openalex Percentile: Top 89%
Wind Energy Research and Development
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.