Effect of Effluent Recirculation on the Performance of an Anaerobic Baffled Reactor in Municipal Wastewater Treatment: A Modeling Approach

This study examined the effect of effluent recirculation on the performance of an anaerobic baffled reactor (ABR) in treating municipal wastewater under mesophilic steady-state conditions. Although effluent recirculation is proposed to enhance ABRs’ performance, its benefits remain inconclusive, highly dependent on wastewater characteristics, and inadequately understood during steady-state conditions. Utilizing the GPS-X computer application, an innovative modeling and simulation approach was employed to evaluate an ABR’s performance in removing chemical oxygen demand (COD) and total suspended solids (TSS). Sensitivity analysis was utilized to refine critical stoichiometric, kinetic, and operational parameters for precise model calibration and validation, thus enhancing the model accuracy. The average absolute relative error (ARE) and Thiel inequality coefficient (TIC) were employed for model calibration and validation. The effect of effluent recirculation on the treatment behavior of the reactor was investigated through model predictions, considering recirculation ratios of 10%, 20%, and 30%. The results showed that effluent recirculation had a limited effect on ABR performance at HRTs of 24, 18, and 12 h, with COD removal efficiency (RE) improving by up to 2.1%, and TSS RE by up to 5.7%. However, at an HRT of 8 h, COD RE declined from 65% (no recirculation) to 61.6% at a 30% recirculation ratio, while TSS RE slightly improved at 10% but decreased by 4.1% at 30%. This study concluded that, under mesophilic conditions, effluent recirculation may not be an effective strategy for improving ABR performance in municipal wastewater treatment, potentially increasing operational costs due to an increase in energy consumption for effluent recirculation.