Leakage Flow Characteristics of Novel Two-Stage Brush Seal with Pressure-Equalizing Hole

Uneven inter-stage pressure drops of the common two-stage brush seal (CBS) lead to a problem that the second stage bristles bear excessive pressure load, and this problem leads to the premature failure of the brush seal. In this paper, a novel two-stage brush seal (NBS) with the backing plate holes of the second stage was proposed, and a three-dimensional numerical model of the NBS was established. Then, the effects of the pressure-equalizing (PE) hole on the inter-stage pressure drop distribution of the NBS were numerically analyzed, and an optimal structure was obtained. Finally, the leakage flow characteristics of this optimal structure were studied. The results showed that the NBS with PE hole increased the passage area of the downstream, and so effectively improved the uneven pressure drops of the CBS, and the pressure drop balance ratio of the NBS was obviously smaller than that of the CBS. For the structural parameters studied in this paper, the pressure drop balance ratio of the NBS was improved by 45.6~67.9% compared to the CBS. Moreover, when PE holes were 0.4 mm in diameter, 5.95 mm in height, and the number of rows was 1, the NBS had the best pressure drop balance and its leakage was only 8.7% higher than that of the CBS.